Konica Minolta CM-2500d Drums User Manual


 
E-101
TASK Mode
[Setting Procedure]
Make sure that power to the instrument is turned OFF.
1
While pressing A, turn the power ON.
(Back side)
The <INITIAL SETTING> screen
will appear, with the item “LAN-
GUAGE” highlighted.
2
Turn B to select the desired language, then press A.
When the cursor moves to the desired language, all the text will be displayed in the selected language.
3
Turn B to select “TASK”, then press A.
4
Turn B to select the desired target mode, then press A.
TARGET
linked to each data.
defined in COND.
M
emo
If you do not want to change the
target mode, press A.