Filter
Top Products
E-68
Displaying the Measurement Results
B Deletes the currently displayed measured data.
C Displays other measred data.
D Outputs the currently displayed measured data to the printer.
E Returns to the <COND
*
> screen.
F Appears if there is insufficient battery power when the instrument is powered by the
battery. If
appears, replace the batteries with new ones.
Assessments
The following screen appears if “ASSESSMENTS” has been selected for “DISPLAY” mode and toler-
ances have been set.
M
emo
“#####” will be displayed if the color difference data has two or more decimal places.
• Displaying Assessment by Box Tolerance
1 Ready to measure.
2 Currently selected <COND
*
> no.
3 Mask/gloss/UV at the time of measurement
4 Currently selected observer/illuminant
5 Currently selected measured data no.
6 Currently selected target color data no.
7 Color Difference from the target, result of PASS/FAIL judgment and message indicating
the deviation direction
8 Measurement date. For the year, only the lower two digits are displayed.
9 Displays the relative gloss value. If the gloss value exceeds 200, the screen will display
“G###” in place of the value.
0 Deletes the currently displayed measured data.
A Displays other measured data.
B Switches the screen page from one to another (when there are two pages or more).
C Switches to the <TARGET> screen for the currently selected no. (T
*
).
D Outputs the currently displayed measured data to the printer.
E Returns to the <COND
*
> screen.
F Appears if there is insufficient battery power when the instrument is powered by the bat-
tery. If appears, replace the batteries with new ones.