Konica Minolta CM-2500d Drums User Manual


 
E-30
Initial Setting
Setting the Date and Time
[Setting Procedure]
<MENU> screen
1
Turn B to select “CLOCK”, then press A.
2
Turn B to select “ADJUST”, then press A.
The cursor will move to the current-
ly set date, allowing you to change
it.
3
Turn B to select the desired date and time, then press A.
The selected date and time will be
set.
Each time A is pressed, the cursor will move as follows:
“day” “month” “year” “hour” “minute” “second” “PREV”
Keeping B held down to left or right will cause the date/time to change continuously.
To change the entries, restart from step 2.
<Settings>
• Day: 01 to 28, 29, 30, 31 (varies with the selected month)
• Month: 01 to 12
Year: 00 to 99 (lower two digits)
Hour: 00 to 23
Minute: 00 to 59
Second: 00 to 59
4
Turn B to select “PREV”, then press A.
The settings you made at step 3 will
be confirmed, and the <MENU>
screen will reappear.