Konica Minolta CM-2500d Drums User Manual


 
E-102
TASK Mode
The <INITIAL> screen will appear.
Example when tasks 1, 2 and 5 have been downloaded.
5
Turn B to select “TASK
*
”, then press A.
A message asking you to check the
currently set mask and measurement
area will appear.
6
Check the Target Mask and measurement area selector switch, then press A.
The <CALIBRATION> screen will
appear.
Note that the White Calibration
Plate No. is displayed.
7
<To Perform Zero Calibration>
Turn B to select “ZERO”, then press C (MEAS. button).
M
emo
For details of zero calibration, refer to page E-44.
Note
Never place the specimen measuring port toward the light source. Keep it more than 1m away from any
reflective items (hands, desks, walls etc.).