Konica Minolta CM-2500d Drums User Manual


 
E-95
Connecting to an External Device
2. Turn the power ON.
3. Turn B to select “MENU”, then press A.
4. Turn B to select “AUTO PRINT”, then press A.
5. Turn B to select “ON”, then press A.
Measured data will be printed automati-
cally each time measurement is taken.
Printing Measured Data
M
emo
To print measured data, make sure that the instrument is connected to the printer with a printer cable.
Note
The instrument and printer must be connected using a printer cable that is wired as shown in “Printer Cable
Wiring Diagram” (page E-92).
Before connecting, make sure that the power to both the instrument and printer is turned OFF.