Konica Minolta CM-2500d Drums User Manual


 
E-82
Pass/Fail Judgment for Color Difference
4
Turn B to select “TOLERANCE”, then press A.
The currently set tolerances will be
displayed.
5
If they are satisfactory, turn B to select “BREAK”, then press A.
The measurement screen will ap-
pear.
6
Place the specimen measuring port to the specimen, and then press
C
(MEAS. button).
<If “DIFF&ABS” has been selected as the display mode>
Values for the items that have failed
will be highlighted.
“#####” will be displayed if the color difference data has two or more decimal places.
<If “PASS/FAIL” has been selected as the display mode>
“FAIL” will be displayed and high-
lighted if any of the items has failed,
and “PASS” will be displayed if all
the items have passed.
Here the judgment result is “PASS”, and the results are displayed as shown above according to the condi-
tions when the data was measured.
Here the judgment result is “FAIL”, and the results are displayed as shown above according to the condi-
tions when the data was measured.