Filter
Top Products
Panel descriptions
16
r
E-60/E-50 Music Workstation
c
POWER ON button
Press this button to switch the E-60/E-50 on and off.
If you need to turn off the power completely, first
turn off the power switch, then unplug the power
cord from the wall outlet. Refer to “Switching the
E-60/E-50 on/off” on p. 19.
d
BENDER/MODULATION lever
When pushed towards the back of the E-60/E-50, this
lever will add modulation to the notes of the Key-
board parts you are playing at that time. Move it to
the left or right to temporarily lower or increase the
pitch of the Keyboard part notes you are playing. For
the sounds of the TONE [ORGAN] family, you can use
the Modulation axis to alternate between the fast
and slow Rotary speeds.
e
PHONES 1 &2 sockets
This is where you can connect two pairs of optional
headphones (Roland RH-25, RH-50, RH-200 or
RH-300).
f
Floppy disk drive
This is where you can insert 2DD or 2HD floppy disks
for external storage of your Music Styles, Recorder
songs, User Programs, and MIDI Sets. Press the eject
button to remove the disk from the drive.
Note: Do not remove the floppy disk while the E-60/E-50
accesses the disk (to load/save data, etc.). Doing so may dam-
age both the floppy disk and the drive’s head.
e
d
f
c
E-60_50_OM_UK.book Page 16 Thursday, June 22, 2006 10:06 AM