Roland E-60, E-50 Electronic Keyboard User Manual


 
Additional Arranger/Style functions
72
r
E-60/E-50 Music Workstation
(3) Press the field of the Music Style you want to use.
In some cases, an error message (“File not found”)
displayed at this point means that the card does not
contain the referenced file.
Note: If you do not want to use the Style after all, press [EXIT].
In that case, the E-60/E-50 keeps on using the last Style it did
find.
Disk User
You can also load one Music Style directly into the
E-60/E-50’s Disk User memory and use it. You could
take advantage of this function whenever none of the
CUSTOM memories refer to the Music Style you need
for playing a given piece. As its name implies, you can
also use this function for working with Styles on floppy
disk.
Note: The Music Style in this memory is only available until you
switch off the E-60/E-50 or load another Style. Be aware that
selecting a CUSTOM memory also overwrites the last Disk User
Style you selected.
(1) If necessary, insert the memory card or floppy disk
with the desired Music Style into the slot or disk
drive.
(2) On the STYLE page (see above), press the
[DISK¥USER] field.
The display changes to:
(3) Press the [EXTERNAL¥MEMORY], [FLOPPY] or
[INTERNAL¥MEMORY] field to select the memory
area that contains the desired Style.
Note: It is perfectly possible to use “older” Styles with the
E-60/E-50. They are automatically converted to the new VARI-
ATION [1]~[4] system.
(4) Press the field that contains the name of the Style
you want to load.
(5) If the desired Style is not displayed, use [ø][˚] to
select another group of 5 Styles.
You can also use the [DATA÷ENTRY] dial and the
[DEC]/[INC] buttons for selecting other pages with dif-
ferent Music Styles.
Note: The E-60/E-50 contains a powerful search engine for
quickly locating the desired Music Style on a card or in the
internal memory (page 73). It is not available for Styles on
floppy disk, however.
The display page does not change when you select a
Style. This was done to allow you… to load another
Style.
(6) Start playing with the newly selected Style.
The selection of the DISK USER Style will be written
to a User Program (page 88). The User Program in
question refers to the name and memory area. Next
time you recall such a User Program, the E-60/E-50
will therefore use the referenced Style.
If the Style in question cannot be found, an error
message appears and the E-60/E-50 goes on using
the previously selected Style.
(7) Press the [EXIT] button to return the main page.
The name of the selected Style appears in the [STYLE]
field.
E-60_50_OM_UK.book Page 72 Thursday, June 22, 2006 10:06 AM