Filter
Top Products
Master Tune
E-60/E-50 Music Workstation
r
51
Master Tune
This is not really a performance function, but it allows
you to tune your E-60/E-50 to acoustic instruments
that cannot be tuned.
(1) Press the [MENU] button.
The display changes to:
(2) Press the [TUNING] field, followed by the
[MASTER¥TUNE] field.
(3) Use the [DATA÷ENTRY] dial to set the desired tun-
ing.
The default value is “440.0”. You can return to this
value by pressing the [440.0Hz] field.
(4) Press the [EXIT] button to return to the main page.
See page 49 for the Global Transpose parameter.
Using the D Beam Controller (E-60)
The D Beam controller allows you to control various
aspects of your performance or to add something to
the music, by moving your hand, head, etc., in the air.
You only need to make sure that you do so over the
two “eyes” and within a 40cm (±16”) range. Your
movements are translated into musical expression. The
E-50 has no D Beam controller.
Let’s first try out the DJ GEAR functions.
(1) Press the D BEAM button that is assigned to the
function you wish to use (here the [DJ¥GEAR] but-
ton):
This switches on the D Beam controller, while the dis-
play changes to:
You can also select this page by pressing the [MENU]
button‰ [D¥BEAM] field‰ [DJ¥GEAR] field. But the
above method is a lot faster.
(2) Start playback of a Music Style (page 22) or song
(page 35).
(3) Move your hand towards and away from the D
Beam’s “eyes”.
What you hear now is the “VinylRPM” effect. Now
let’s do some scratching…
(4) Press the [SCRATCH] field.
(5) Again move your hand towards and away from the
D Beam.
Now you should hear a scratch sound.
Try out some other effects by pressing the
[SOUND¥EFX], [INSTRUMENTS] and [CONTROL] fields
and selecting one of the available options.
MENU
E-60_50_OM_UK.book Page 51 Thursday, June 22, 2006 10:06 AM