Filter
Top Products
21
Getting Ready
You can copy Setup files and song files to separately sold USB memory for safekeeping.
You can also play back SMF music files that’s saved on USB memory (p. 40), or play audio files
from USB memory (p. 42).
You can also use a separately sold floppy disk drive to copy data to a floppy disk. For details,
refer to the owner’s manual of your floppy disk drive.
Use USB memory and floppy disk drive available from Roland. Proper operation cannot be
guaranteed if other USB device is used.
1.
Connect your USB memory to the USB MEMORY connector located on the RD-300GX’s
rear panel.
Carefully insert the USB memory all the way in—until it is firmly in place.
If you’re using new USB memory, you must first initialize (format) it on the RD-300GX.
For details, refer to “Formatting Memory (Format)” (p. 76).
You can also connect a commercially available CD drive or floppy disk drive (sold separately)
to the USB MEMORY connector.
Using a USB Memory
Connecting a USB Memory
NOTE
USB memory
(sold separately)
RD-300GX_e.book 21 ページ ２００８年２月１４日 木曜日 午後１時２６分