Filter
Top Products
33
Performance
The RD-300GX can apply a reverb effect to the notes you play on the keyboard.
Applying reverb adds pleasing reverberation to what you play, so it sounds almost as if
you were playing in a concert hall.
fig.Q1-24rev
1.
Press the [REVERB] button, getting its indicator to light.
Try fingering the keyboard.
The reverb effect is applied to the entire tone.
2.
To eliminate the Reverb effect, press the [REVERB] button once more, extinguishing the
indicator.
You can select from six different reverb effect types.
1.
While holding down the [EXIT/SHIFT] button, press the [REVERB] button.
fig.disp
2.
Use the [DEC] [INC] buttons to switch the reverb type.
3.
After determining the type, press the [EXIT/SHIFT] button.
Adding Reverberation to the Sound ([REVERB] Button)
Changing the Reverb Effect Type
TYPE
Explanation
STAGE
This reverb simulates the reverberation of a stage. It produces more
reverberation than HALL.
ROOM
Simulates the reverberation of room interiors. It produces a well-
defined and spacious reverberation.
HALL
Simulates the reverberation exhibited by hall. It provides a deeper
reverberation than the Room reverbs.
PLATE
Simulates a plate reverb unit (a type of artificial reverb that utilized a
metal plate).
GM2 REVERB
Reverb for use with GM2
CATHEDRAL
This reproduces the reverb found in a church cathedral.
RD-300GX_e.book 33 ページ ２００８年２月１４日 木曜日 午後１時２６分