42
Using the Convenient Functions in Performances
The RD-300GX lets you play audio files saved on USB memory (sold separately) while
you perform. This is called the “Audio Key” function.
The Audio Key function lets you assign an audio file to each key B 0–B1, and play those
audio files by pressing the corresponding key. You can assign various phrases to the keys
and play them at the appropriate moments during your performance.
You can also specify that an audio file play repeatedly, or reserve the audio file that
should be played next.
If you turn on the Audio Key function when USB memory containing audio files is not
connected, an audio file built into the RD-300GX will be selected.
Here are some ways in which you can enjoy using the Audio Key function.
• By switching audio files between sections such as Intro, Theme, Break, and Ending
as your song progresses, you can freely change the structure of the song while you
perform.
• Assign a different audio song to each key, and use the keyboard to switch songs
so you can perform to the accompaniment of an audio song.
Here’s how you can perform while playing audio files saved on USB memory (sold
separately).
Before you begin, install the included “Audio Key Utility 2” into your computer, and
prepare the audio file set that you want to play back on the RD-300GX.
The included CD-ROM contains a sample audio file set that you can copy to USB memory
and use.
1.
Connect the USB memory containing the audio file set to the USB MEMORY connector (p.
21).
2.
While holding down the [AUDIO KEY] button, and use the [DEC] [INC] buttons to select
an audio file set.
Performing with Audio Files ([AUDIO KEY] Button)
Performing with Audio Files from USB Memory
RD-300GX_e.book 42 ページ 2008年2月14日 木曜日 午後1時26分