Filter
Top Products
71
Detailed Settings for Each Function ([EDIT] Button)
These settings determine whether the pedals connected to
each PEDAL jack (DAMPER, CONTROL), the Modulation lever,
the Pitch Bend lever (Bender), and the [S1] [S2] buttons are
used to control the Zone (ON), or not (OFF).
Sets the part on or off.
1.
Press the [EDIT] button, getting the indicator to
light.
The Edit Menu screen appears.
fig.disp
2.
Use the [DEC] [INC] buttons to select “Part
Switch,” then press the [ENTER] button.
fig.disp
3.
While continuing to hold down the [EXIT/
SHIFT] button, use the [DEC] [INC] buttons to
select the part to be set.
4.
Use the [DEC] [INC] buttons to switch the
setting to “ON” or “OFF.”
The part number is shown for parts that are turned on,
and “–” is shown for parts that are turned off.
5.
When you have finished making the settings,
press the [EDIT] button, extinguishing its
indicator.
On the RD-300GX, UPPER 1 is fixed as Part 1 (Ch
1), UPPER 2 is fixed as Part 2 (Ch 2), while
LOWER is fixed as Part 3 (Ch 3). Note that the
keyboard won’t produce sound if Parts 1, 2 and 3
are set to OFF.
Turning the Controllers in Each Zone
On and Off
Parameter
Value
Damper Pedal Sw
OFF, ON
ControlPedal Sw
Bender Sw
Modulation Sw
S1 Sw
S2 Sw
Part On/Off (Part Switch)
NOTE
RD-300GX_e.book 71 ページ ２００８年２月１４日 木曜日 午後１時２６分