Filter
Top Products
48
Using the Convenient Functions in Performances
1.
While holding down the [EXIT/SHIFT] button, press the [MULTI EFFECTS] button.
The effect name and number appear in the display.
2.
Press the [DEC] [INC] buttons to select the effect type.
3.
After determining the type, press the [EXIT/SHIFT] button to return to the previous
screen.
For more on the RD-300GX’s internal effect types, refer to the “Effect List” (p. 87).
The Rotary effect is applied to some Organ Tones you can select with the [ORGAN]
button. When one of these Tones is selected, you can use the [MULTI EFFECTS] button to
change the speed of the rotary effect.
What the rotary effect does is to add a “spinning” effect similar to the sound of an organ
using a rotating speaker.
1.
Press the [ORGAN] button and select the organ Tone.
When a Tone that has the Rotary effect added is selected, the [MULTI EFFECTS] button’s indicator
flashes.
2.
Each time pressing the [MULTI EFFECTS] button, switch the speed of the rotary effect
between fast and slow rotation.
When the [MULTI EFFECTS] button’s indicator flashes, a more fast rotary effect is applied.
When the [MULTI EFFECTS] button’s indicator blinks, a slower rotary effect is applied.
To prevent the Rotary effect from being applied, select an effect type other than the
Rotary effect and then remove the effect.
You can apply the rotary effect to Tones other than the organ Tones as well.
Changing the Multi-effects Type
Changing the Undulation of the Organ Tone (Rotary Effect)
Choosing the Zone to which the multi-effect will apply
On the RD-300GX, only one type of multi-effect can be used at a time. For this reason,
there’s a “MFX Zone” setting that lets you choose the Zone to which the multi-effect is to
be applied. Be aware that if you’re playing more than one Zone simultaneously, there
will be a Zone to which the multi-effect is not applied.
RD-300GX_e.book 48 ページ ２００８年２月１４日 木曜日 午後１時２６分