Filter
Top Products
60
Making Detailed Settings for the ONE TOUCH Tones
You can make detailed settings to adjust the piano sound
that’s used when you press the ONE TOUCH [PIANO] button
(p. 26).
This function is called “Piano Designer.”
Furthermore, you can save the changed settings.
When the ONE TOUCH [PIANO] button is
pressed, all settings other than the Piano Designer
settings are switched to their status at the time the
RD-300GX’s power was turned on.
Store any arrangements of settings that you want
to keep in Setup (p. 51).
1.
Press the [ENTER] button in the ONE TOUCH
PIANO screen to select the type you want to
set.
2.
Use the [DEC] [INC] buttons to select the
parameter to be set, then press the [ENTER]
button.
fig.disp
3.
Use the [DEC] [INC] buttons to set the value.
4.
If you want to save the setting, press the
[WRITE] button.
The confirmation message appears.
Press the [ENTER] button to save the settings.
If you want to cancel, press the [EXIT/SHIFT] button.
5.
When you finish making settings, press the
[EXIT/SHIFT] button.
You are returned to the ONE TOUCH PIANO screen.
Depending on the piano tone selected, this setting
may not be available.
This chooses the piano Tone to be selected when the ONE
TOUCH [PIANO] button is pressed.
You can choose from the Tones of the TONE SELECT [PIANO]
button.
This does the same thing as the setting described in
“Changing the Depth of Reverb Effect” (p. 34), but this setting
can be easily accessed by pressing the ONE TOUCH
[PIANO] button.
Reproduces the way the brightness of a grand piano’s sound
is affected by how much the piano’s lid is opened.
This adjusts the damper noise (the sound that occurs when the
strings of an acoustic piano are released by pressing the
damper pedal).
Making Detailed Settings for the
Piano Tones (Piano Designer)
Making the Settings
NOTE
NOTE
Selecting the Piano Sound (Tone)
Changing the Amount of Reverb Effect
(Reverb Depth)
Parameter
Value Description
Reverb
Amount
0–127
The reverb effect becomes
stronger as the value is
increased.
Opening/Closing the Piano Lid (Lid)
Parameter
Value Description
Lid
1–7
The lid is opened more as the
value is increased, creating a
brighter sound.
Adjusting the Damper Noise
(Damper Noise)
Parameter
Value Description
Damper
Noise
0–127
Increasing this value will
increase the sound that is
heard when the strings are
released.
RD-300GX_e.book 60 ページ ２００８年２月１４日 木曜日 午後１時２６分