Filter
Top Products
70
Detailed Settings for Each Function ([EDIT] Button)
This sets the pitch of the Tone.
1 cent = 1/100 semitone
With some Tones, there may be ranges in which
the pitch does not change as intended.
This sets the amount of pitch change that will occur when you
move the Pitch Bend lever (2 octaves).
You can make more detailed settings for the Zone.
Press the ZONE SELECT button to select the Zone
to be set.
You can perform with each Zone transposed to a different
pitch.
When multiple Tones are playing, you can create a richer
sound by setting the two Tones to different octaves. Also, if the
keyboard mode is set to Split and you are playing a bass Tone
in the lower Zone, you can use the Transpose function to play
the bass at a lower pitch.
You can also set the same degree of transposition
for all parts with the [TRANSPOSE] button. For
details, refer to “Transposing the Key of the
Keyboard ([TRANSPOSE] Button)” (p. 32).
Sets the panning (localizes sound image) for each of the
Zones.
The Pan setting localizes the sound image of each Zone when
the output is in stereo. With an increase in the value for L,
more of the sound will be heard as coming from the left side.
Similarly, more of the sound will originate at the right if the
value of R is increased. When set to 0, the sound is heard as
coming from the center.
Changing the Pitch
(Coarse Tune/Fine Tune)
Parameter
Value Description
Coarse Tune
-48–+48
(+/- 4 octaves)
Sets the sound’s pitch
in semitone units.
Fine Tune
-50–+50
(+/- 50 cents)
Sets the sound’s pitch
in units of one cent.
Changing the Bend Range
(Bend Range)
Parameter
Value
Bend Range
0–24 (semitone)
NOTE
Making the Settings for Each
Zone Individually
(Zone Parameter)
Setting the Transposition for Each
Individual Zone (Transpose)
Parameter
Value
Transpose
-48–0–+48
Setting the Pan (Pan)
Parameter
Value
Pan
L64–0–R63
RD-300GX_e.book 70 ページ ２００８年２月１４日 木曜日 午後１時２６分