Roland V-Synth Musical Instrument User Manual


 
42
Creating a Patch
Modifying Waveforms (OSC1/
OSC2)
Oscillator Switch
Switches the oscillator on/off.
Value: OFF, ON
OSC Type
Analog Oscillator
PCM Oscillator
Oscillator Type
Selects the type of oscillator.
By selecting “EXT IN,” the signal that is input through the rear panel
INPUT jack can be used as an oscillator. This lets you play the
externally input signal from the keyboard.
Value
ANALOG: Analog Oscillator
PCM: PCM Oscillator
EXT IN: External Input Oscillator
Wave Gain
Sets the gain (amplification) of the waveform.
Value: -12– +12 dB
Waveform (Analog Oscillator Waveform)
Selects the wave upon which the sound is to be based when using an
analog oscillator.
Value
O: effective X: ineffective
Impact (Analog Oscillator Impact)
Specifies the sharpness of the attack of the analog oscillator. Higher
settings will produce a sharper attack.
Value: 0.0–4.0
Time Trip Sw (Time Trip Switch)
Selects whether Time Trip will operate (ON) or not (OFF).
Value: OFF, ON
Beat Keep (Time Trip Beat Keep)
After Time Trip is operated, this selects whether you will “chase” to
the beat location where you otherwise would have been if Time Trip
had not been operated (ON), or whether this “chase” will not occur
(OFF).
Value: OFF, ON
Waveform (PCM Oscillator Waveform)
Selects the wave upon which the sound is to be based when using a
PCM oscillator.
Value: 1–999 (wave number)
When you touch <List>, the Wave List window will appear,
allowing you to select the wave from the list.
When you select a wave, the wave name, encoding type, and
stereo/mono will also be displayed.
Vari Sw (PCM Oscillator Vari Switch)
Switches whether the sound will be produced using Vari Phrase
(ON) or linearly (OFF).
Value: OFF, ON
Start Offset (PCM Oscillator Start Offset)
Specifies the starting address of the wave.
Value: 0–**
Waveform
Pulse Width
(p. 44)
Fat (p. 44)
SAW: Sawtooth wave O O
SQR: Square wave O O
TRI: Triangle wave O O
SINE: Sine wave O O
RAMP: Ramp wave O O
JUNO: Modulated sawtooth wave O O
HQ-SAW:
High quality sawtooth wave
X X
HQ-SQR: High quality square wave O X
NOISE: Noise wave O X