Filter
Top Products
48
Creating a Patch
Making Envelope Settings
This section explains the envelope setting screens.
fig.03-26_50
Velocity Curve (Envelope Velocity Curve)
Choose from the following seven curves to specify how your
keyboard playing strength will affect the envelope depth. If you
don’t want your keyboard playing strength to affect the envelope
depth, set this to “0”.
Value:
0–7
fig.Curve-7
Velocity Sens (Envelope Velocity Sensitivity)
Keyboard playing dynamics can be used to control the depth of the
envelope. If you want the envelope to have more effect for strongly
played notes, set this parameter to a positive (+) value. If you want
the pitch envelope to have less effect for strongly played notes, set
this to a negative (-) value.
Value:
-63– +63
Velocity A-Sens (Envelope Attack Time Velocity
Sensitivity)
This allows keyboard dynamics to affect the attack time of the
envelope. If you want attack time to be speeded up for strongly
played notes, set this parameter to a positive (+) value. If you want it
to be slowed down, set this to a negative (-) value.
Value:
-63– +63
Velocity D-Sens (Envelope Decay Time Velocity
Sensitivity)
This allows keyboard dynamics to affect the decay time of the
envelope. If you want decay time to be speeded up for strongly
played notes, set this parameter to a positive (+) value. If you want it
to be slowed down, set this to a negative (-) value.
Value:
-63– +63
Velocity R-Sens (Envelope Release Time
Velocity Sensitivity)
The parameter to use when you want key release speed to control
the release time value of the envelope. If you want release time to be
speeded up for quickly released notes, set this parameter to a
positive (+) value. If you want it to be slowed down, set this to a
negative (-) value.
Value:
-63– +63
ADSR Attack (Envelope Attack Time)
★◆
Specifies the attack time of the envelope (the time from when you
press a key until the envelope level reaches the maximum value).
Value:
0–127, Note
ADSR Decay (Envelope Decay Time)
★◆
Specifies the decay time of the envelope (the time from when the
envelope level reaches the maximum value until it falls to a constant
value).
Value:
0–127, Note
ADSR Sustain (Envelope Sustain Level)
★
Specifies the sustain level of the envelope (the level at which the
envelope remains constant).
Value:
0–127
ADSR Release (Envelope Release Time)
★◆
Specifies the release time of the envelope (the time from when you
release a key until the envelope level reaches 0).
Value:
0–127, Note
“ENVELOPE” in the lower right of the screen shows a graphical
representation of the envelope produced by the current settings.
Env Depth (Envelope Depth)
Specifies the depth of the envelope. Higher settings will cause the
envelope to produce greater change. Negative (-) settings will invert
the shape of the envelope.
Value:
-63– +63
Env Time KF (Envelope Time Key Follow)
Make this setting when you want the decay time and subsequent
times of the envelope to be affected by the location of the key you
play. Based on the envelope times for the C4 key (center C), positive
(+) settings will cause notes higher than C4 to have increasingly
shorter times, and negative (-) settings will cause them to have
increasingly longer times. Larger settings will produce greater
change.
Value:
-200– +200
fig.Time KF.e
0123
4567
C4C3C2C1 C5 C6 C7
0
+50
+100
-50
-100
Key
Time