Filter
Top Products
Owner’s Manual
Quick Guide
Performance mode Playing the Performances
30
3 System Effects (Reverb, Chorus)
5. Set the detailed effect parameters as necessary.
Press the [EFFECT] button to call up the Effect Edit display. You
can edit detailed parameters from this display.
The PAGE [E][F] buttons can be used to switch between Effect
Types. Select the desired parameter for editing by using the cursor
[L][M] buttons and change the settings with the data dial.
n The available parameters differ depending on the selected Effect type. For
information on the Effect Parameters, refer to the separate Data List.
n If “thru” or “off” is selected for the effect type, none of the effect
parameters can be edited.
6. As necessary, set the Master Effect or Master Equalizer
in the MEF or MEQ display from the Voice mode ➞
[UTILITY].
For details on the structure of the effects, see page 59.
n When setting the Master Effect, make sure to turn Master Effect on. (Press
the [SHIFT] + [BYPASS], then turn “Master” parameter to “effect on.”)
7. Store the edited Voice.
If you wish to save the new settings, store the settings with the
other Voice parameters as a single Voice before you leave the
selected Voice (page 49).
If you call up another Voice or another mode without saving, the edited
settings may be lost.
Performance mode
In this section, you’ll learn how select and play Performances, edit them and set their effects.
Playing the Performances
As in the Voice Play mode, the Performance Play mode is where
you select and play the instrument sounds of this tone generator.
Here we’ll show how to play in the Performance Play mode.
Each Performance can contain up to four different Parts. You can
create a Performance by layering several Voices together, and by
assigning different Voices to separate ranges of the keyboard.
n Make sure that the MIDI Transmit Channel of the external MIDI keyboard
matches the MIDI Receive Channel of the MOTIF-RACK ES (page 16).
Selecting a Performance
When shipped from the factory, this tone generator contains a full
set of specially programmed 128 User Performances in the User
Bank. In the Performance Play mode, you can select and play
individual User Performances. Since there is only one bank for
Performances, you need not select a Performance Bank.
n Performance User Bank
Keep in mind that if you overwrite a Performance in a User Bank, the User
Performance will be lost. When you save the edited Performance, be careful
not to overwrite any important User Performances.
1. Press the [SHIFT] + [PERFORM] buttons to enter the
Performance Play mode.
The [PERFORM] button LED lights in orange. In this condition,
playing the external keyboard sounds the Performance in the
display.
The parameters shown in the Performance Play mode are briefly
explained below.
2. Select a program number with the data dial or cursor
[L][M] buttons.
ReverbType (Reverb Type) For setting the Reverb Effect Parameters.
RevSend (Reverb Send)
ReverbRtn (Reverb Return)
ReverbPan (Reverb Pan)
ChoCtgry (Chorus Category) For setting the Chorus Effect Parameters.
ChoType (Chorus Type)
ChoSend (Chorus Send)
ChoRtn (Chorus Return)
ChoPan (Chorus Pan)
ChoToRev (Chorus to Reverb) For adjusting the Send Level from the
Chorus Effect to Reverb Effect.
Effect Type (Ins1, Ins2, Rev, Cho)
CAUTION
Values of AS1/2
(ASSIGN 1/2)
(page 45)
Functions assigned
to ASA/B (ASSIGN
A/B) (page 45)
Program number
Bank
Category
Performance
name
Selected Arpeggio (page 42)