Filter
Top Products
Owner’s Manual
Utility
Voice mode
Performance modeMulti modeEffectArpeggio
Reference
Voice mode Voice Edit (for Plug-in Voice)
75
Voice Edit (for Plug-in Voice)
These parameters are basically the same as in Normal Voice Edit. Unlike with Normal Voices, the Plug-in Voices only have one Element for
editing.
n Depending on the particular Plug-in Board you are using, some of the parameters described here may not be available.
n For details on the current lineup of available Plug-in Boards, see page 52.
Common Edit
[VOICE] → select Plug-in Voice → [Edit] → [SHIFT]+[COMMON] → select each display with PAGE [E][F]
General
Same as the General display in Normal Voice Common Edit. See page 65. The following parameters are not
available for Plug-in Voice:
• Portamento Mode, Time Mode, and Legato Slope settings
• Micro Tuning settings
Unlike with Normal Voice Edit, the Upper and Lower ranges cannot be independently set here.
Output
Same as the Output display in Normal Voice Common Edit. See page 66.
EG/FLT (Envelope Generator/Filter)
Same as the EG/FLT display in Normal Voice Common Edit. See page 66.
The following parameters are only available for Plug-in Voice: AEG Attack, AEG Decay, AEG Release, Cutoff,
Resonance
CtrlSet (Controller Set)
Same as the CtrlSet display in Normal Voice Common Edit. See page 66. Please note that the Element
Switch parameter is not available in the Plug-in Voice Common Edit mode.
Set1/2Source
Controller Set Source Same as the CtrlSet display in Normal Voice Common Edit. See page 66. Please note that the Element
Switch parameter is not available in the Plug-in Voice Common Edit mode.
Set1/2Dest
Controller Set Destination
Set1/2Depth
Controller Set Depth
MW Filter
Modulation Wheel Filter Determines the depth of control of the Modulation Wheel over the filter cutoff frequency.
Settings: -64 ~ 0 ~ +63
MW PMod
MW Wheel Pitch Modulation
Depth
Determines the depth of control the Modulation Wheel has over pitch modulation. The higher the setting, the
greater the depth of control.
Settings: 0 ~ 127
MW FMod
Modulation Wheel Filter
Modulation Depth
Determines the depth of control the Modulation Wheel has over filter cutoff modulation. The larger the
setting, the greater the depth of control.
Settings: 0 ~ 127
MW AMod
Modulation Wheel Amplitude
Modulation Depth
Determines the depth of control the Modulation Wheel has over amplitude modulation. The larger the
setting, the greater the depth of control.
Settings: 0 ~ 127
AT Pitch
Aftertouch Pitch Determines the depth of control of keyboard aftertouch over pitch. You can set a value (in semitones) of up
to two octaves.
Settings: -24 ~ 0 ~ +24
AT Filter
Aftertouch Filter Determines the depth of control of keyboard aftertouch over the Filter Cutoff Frequency.
Settings: -64 ~ 0 ~ +63
AT PMod
Aftertouch Pitch Modulation
Depth
Determines the depth of control that keyboard aftertouch has over pitch modulation. The higher the setting,
the greater the depth of control.
Settings: 0 ~ 127
AT FMod
Aftertouch Filter Modulation
Depth
Determines the depth of control that keyboard aftertouch has over the filter cutoff modulation. The larger the
setting, the greater the depth of control.
Settings: 0 ~ 127
AT AMod
Aftertouch Amplitude
Modulation Depth
Determines the depth of control that keyboard aftertouch has over the amplitude modulation. The larger the
setting, the greater the depth of control.
Settings: 0 ~ 127
AC Source
Assignable Control Source Determines the MIDI Control Number used to control the filter, PMod, FMod, and AMod.
Settings: 0 ~ 95
AC Filter
Assignable Control Filter Determines the depth of the filter cutoff frequency controlled by the Control Change set in the “AC Source”
parameter above.
Settings: -64 ~ 0 ~ +63
AC PMod
Assignable Control Pitch
Modulation Depth
Determines the depth of control the Control Change messages (selected in the “AC Source” parameter)
have over the pitch modulation. The larger the setting, the greater the depth of control.
Settings: 0 ~ 127
AC FMod
Assignable Control Filter
Modulation Depth
Determines the depth of control the Control Change messages (selected in the “AC Source” parameter)
have over the filter cutoff modulation. The larger the setting, the greater the depth of control.
Settings: 0 ~ 127
AC AMod
Assignable Control
Amplitude Modulation Depth
Determines the depth of control the Control Change messages (selected in the “AC Source” parameter)
have over amplitude modulation. The larger the setting, the greater the depth of control.
Settings: 0 ~ 127