625 Latticework8 96 8,8
(TT) Eight channel version of 'latticework'. Octal in, octal out.
626 LongPanningDelays 96 4,4
627 LongPanningDelays8 48 8,8
627 LongPanningDelays8 96 || 8,8
{DMEY} Eight long delays (10 sec) with separate auto-panning. Envelope detection can be used to modulate the LFO.
Output switch selects stereo or 4 channel out. Will load in dsp A only.
628 Mess With Stereo 96 2,2
[V]{PDME} The left/right input is converted to sum/difference. then, a number of modifiers act upon the signal. finally It is
converted back to left/right. This gives some interesting stereo enhancements. Note: There is a slight delay in
processing. Stereo in, stereo out.
629 PanningDelays_4 96 4,4
630 PanningDelays_8 48 8,8
630 PanningDelays_8 96 || 8,8
{DMEY} Four 5 second delays with separate auto-panning. Envelope detection can be used to modulate the LFO. Output
switch selects stereo or 8 channel out.
631 ParticleAccelerator 96 2,2
{DME}(TT) Phaser and multitap create rapid fire delays that pan left to right. Summed in, stereo out.
632 Pingcombpong 96 2,2
[GK]{D}(TT) Series delays with resonators. Summed in, stereo out.
633 Pingringpong 96 2,2
[GK]{PD}(TT) Series delays with ringmods. Summed in, stereo out.
634 Ringdelays 96 2,2
[GK]{PD}(TT) Parallel delays with ringmods. Stereo in, stereo out.
635 Ringdelays8 96 || 8,4
635 Ringdelays8 48 8,4
[GKS]{PD}(TT) Parallel delays with ringmods and selectable display modes. Switch-able in, quad out.
636 Ringtaps 96 2,2
[GK]{PD}(TT) Series delays with ringmods. Summed in, stereo out.
637 Ringtaps2 96 4,4
638 Ringtaps8 96 8,4
[GKS]{PD}(TT) Series delays with ringmods. <input> mutes secondary DSP inputs.
639 Samp/Hold Smear 96 2,2
{DM} -= Sample / Hold =- A cool Sample / Hold effect, but instead of a filter, we use 'Smear', some delay lines that act
as a complex comb filter. Summed in, stereo out.
640 Trem + Delay 96 2,2
[GK]{PDM}(TT) Combination Trem and RingPong. Summed in, stereo out.
641 TrippyFltrDly 96 2,4
[GVK]{DME}(TT) Input is summed to mono, delayed then routed sequentially to eight bandpass filters. Use <rate> to control
speed of sequence and delay time. Note that <rate> is rate of one entire sequence of eight. Use <ypan> control for
quad effects. Summed in, quad out.
642 Up Banddelay 96 2,2
{DE} Twelve bands, each with a delay. Set for low frequencies first. Stereo in, stereo out.
The H8000 Presets Collection
Release 1.2 Page 25 of 109 12/30/2003
