6326 Tapring Plex 96 2,2
6327 Tapring Plex 2 96 2,4
[G]{PRD}(TT) T_ring plex. Summed in, quad out.
64 Utilities
A bank of useful programs… from accurate chromatic tuner to metronome, MIDI real-time controllers
and test tools.
6410 ChromaticTuner 96 2,2
[GV] Chromatic Tuner - will pass In to out. Summed in, dual mono out.
6411 Dither 96 4,4
This preset allows the user to change the number of output bits in the signal The user can choose between
rectangular (uniform) or triangular distribution. Triangular distribution being more common, it is set by default.
Rectangular noise distribution can be used for audio streams that have already been processed with a rectangular
dither noise. Quad in, quad out.
6412 Metronome 96 0,2
{ME} Bpm metronome. Pick bpm, time signature and # of Bars. Visual+audio references. Nothing in, mono out.
6413 Midi Remote Cntrller 96 0,0
Your EVENTIDE turns into a midi remote controller, with midi 1>16 cc and midi 65, 70, 71 & 72 momentary
controllers. Connect midi out to ext units midi in. Nothing in, nothing out.
6414 Musicians' Calc 96 0,0
A few helpful conversions. No need to run for the calculator. . Nothing in, nothing out.
6415 Quadmixer 96 4,4
Four channel mixer. Quad in, quad out.
6416 Send/Return 96 4,4
Stereo send and return preset. input #1 and 2 to the dsp are the sends, input #3 and 4 to the dsp are the returns.
Use this as a tempate to set up send/return functions inside a preset to and from the second engine. Quad in, quad out.
6417 Switch*8 96 8,8
A general purpose test program, allowing an oscillator to drive selected outputs, and receiving mixed inputs. It is
mainly used for testing phase accuracy of the channels, along with a suitable oscilloscope. Octal in, octal out.
6418 Universal Matrix 96 2,2
M/S (mid/side) recording lets you air stereo events with complete mono compatibility. This setting decodes M/S
recordings & controls their stereo width. It also lets you fix mono and stereo routing. Stereo in, stereo out.
6419 Verb Tester 96 2,2
{M} Tool for assistance in creating reverb presets. Load this preset into dsp A, do reverb work in dsp B (routing B in
series with A). Select 'external' or 'impulse' as a source. For 'external' use a CD or other source.The LFO will crossfade
your source with dead air at the rate selected. For 'impulse' a pulse train of one sample width will hit the output at the
selected rate. Stereo in, stereo out.
6420 White Noise 96 0,2
A single noise source is output on both channels. Nothing in, mono out.
6421 2in8out 96 2,4
Input 1 goes to outputs 1,3,5 and 7. Input 2 goes to outputs 2,4,6 and 8. Stereo in, octal out.
The H8000 Presets Collection
Release 1.2 Page 90 of 109 12/30/2003
