2419 SetNoteRezon 96 4,4
[KS] Four Resonant delays. The resonant frequency of each one is set by the incoming MIDI notes. This preset
requires incoming MIDI in order to function properly. Use the panners to set the quad pan position of each of the
resonators. Use the Input parameter to switch from stereo to quad input. The MIDI mode parameter changes the way in
which incoming MIDI notes are assigned to the four resonators. Quad in, quad out.
26 Mix Tools
Useful mixer tools, including the Mixer’s Toolbox presets, sophisticated structures that include
multi-effects arrays.
2610 Circles&Ellipses 96 4,4
[S] This four channel mixer is for 'static' placement. 'Rotation' knob controls a full 360 degree rotaion for all
channels. Each channel is laid out as a point on a circle 90 degrees apart. Note that one full turn of the 'Rotation' knob
goes through two complete audio rotations. 'Width X' and 'Y' allow elliptical patterns by limiting the width of the field.
'X' represents the horizontal or left-right field, 'Y' the vertical or front-rear field. The 'Weight X' and 'Y' params allow
you to weight or offset the left-right and front-rear fields respectivly. Positive weights force the circle right for 'Weight
X' and front for 'Weight Y'. Quad in, quad out.
2611 LMS Filter 96 2,2
{D} Adaptive filter. Signal goes in left, noise goes in right. There is a delay for the noise input. Signal minus noise
comes out left. Noise from signal comes out right. Check out the LMS module in the manual. Dual mono in, dual mono
out.
2612 Mixer's Toolbox #1 96 2,2
2613 Mixer's Toolbox #2 96 2,2
2614 Mixer's Toolbox #3 96 2,2
w uses a reverse pitch shifter.
2615 Mixer's Toolbox #4 96 2,2
w uses a reverse pitch shifter.
{PRDMCE}(TT) Input tone control into pitch shifter, reverb, and delay (chorus). Pitch shifter also feeds the reverb & delay.
Final output EQ. Summed in, stereo out.
2616 Simple Quadmixer 96 4,4
[S] Four channel mixer. Quad in, quad out.
30 Multi Effects
A set of great multi-effects algorithms, again showing just some of the many possibilities of our open
architecture. From multi-voice delays, choruses, pitch shifters, tremolos, coupled with verbs, to full
blown mixer channels strips dedicated to vocal or instrument sources.
3010 8chorus+4verb 48 4,4
3010 8chorus+4verb 96 || 4,4
{RDM} Quad Chorus with Quad Reverb: Each of the four inputs has two chorus modules: A and B. There is individual
control over the chorus speed and depth as well as a master control which effects all speed/depth values. Each chorus
voice can be individually panned and has it's own volume control. Then the signal runs into a simple reverb. Quad in,
quad out.
3011 BB Delayz 96 2,2
{RDME}(TT) Very fast and close feedback delays in the center of the stereo field, with long echo repeating/panning delays on
the outside of the stereo field. Interesting on percussives as well as tuned instruments. Mono in, stereo out.
3012 Big Squeezolo 96 2,2
{PM} Pitch-shifts with a slight modulation. Squish! Summed in, stereo out.
3013 Crystal Morpher 96 2,4
{PDME} Stereo in summed to mono, then fed to 1x4 auto-morpher, sequentially feeding four discrete parallel mono effects
in the four corners of your sound stage. Mono in, quad out.
The H8000 Presets Collection
Release 1.2 Page 52 of 109 12/30/2003
