Filter
Top Products
35
flashing
2. Press the [CH STATUS/CH SEL] key of the channel
intended for PAN adjustment.
The channel selected flashes, then the input signal and
the current setting of the channel selected appears on the
LCD.
3. Turn the [JOG] dial to set the PAN level.
A graphic display of the PAN parameter appears on the
LCD in real-time.
4. To adjust other channels, press the [CH STATUS/CH SEL]
key of that channel, then go to Step 3.
5. Press the [EXIT/NO] key when adjustments are
completed.
The system returns to the Normal Display.
Equalizer Adjustment
1-1. Press the [HI-G/F/Q] key.
The menu to set the high frequencies of the equalizer
appears.
1-2. Press the [MID-G/F/Q] key.
The menu to set the mid frequencies of the equalizer
appears.
1-3. Press the [LO-G] key.
The menu to set the low frequencies of the equalizer
appears.
2. Press the [CH STATUS/CH SEL] key of the channel
intended for equalizer adjustments.
The channel name and current setting of the channel
selected appears on the LCD.
3. Every time the [HI-G/F/Q] key or [MID-G/F/Q] key is
pressed the parameter alternates from G (Gain) -> F
(Frequency) -> Q (Characteristic Curve). Select the item
to adjust.
Only the G (Gain) can be adjusted for the low frequency
equalizer ([LO-G] key). Therefore, the item will not
change by pressing the key.
4. Turn the [JOG] dial to modify the parameter of the item
to adjust.
The EQ setting graphically appears on the LCD in real-
time.
5. To adjust other items or another frequency range of the
equalizer, press again the [HI-G/F/Q] key, [MID-G/F/Q] key
or [LO-G] key. Then turn the [JOG] dial to modify the
parameter.
6. To adjust other channels, press the [CH STATUS/CH SEL]
key of that channel.
7. When adjustments are completed, press the [EXIT/NO]
key.
The system returns to the Normal Display.
Effect Send Level Adjustment
1. Press the [CH PARAM EDIT-EFF1/EFF2] key.
Every time the key is pressed the mode alternates between
the EFF1 and EFF2 menu.
2. Press the [CH STATUS/CH SEL] key of the channel
intended to adjust the effect send level.
The channel name and current setting of the channel
selected appears on the LCD. Press the [MASTER CH
STATUS/CH SEL] to adjust the master send level.
3. Turn the [JOG] dial to set the effect send level.
4. To adjust other channels, press the [CH STATUS/CH SEL]
key of that channel.
5. When adjustments are completed, press the [EXIT/NO]
key.
The system returns to the Normal Display.
Modifying Effect Type
1-1. Press the [EFF EDIT-EFF1] key.
The effect 1 selection menu appears along with the
currently set effect type.
1-2. Press the [EFF EDIT-EFF2] key.
The effect 2 selection menu appears along with the
currently set effect type.
2. Turn the [JOG] dial to select the effect type.
3. Press the [ENTER/YES] key.
The mode switches to the effect selected.
It is possible to adjust the parameters of the effect in this
state. The parameter settings alternate every time the
[EFF EDIT-EFF1] key or [EFF EDIT-EFF2] key is pressed.
Turn the [JOG] dial to modify the parameters. Only the
effect type is modified here. For more details refer to a
later section.
4. When adjustments are completed, press the [EXIT/NO]
key several times.
The system returns to the Normal Display.
Example: Display when the [EFF EDIT-EFF1] key is pressed.
flashing