Filter
Top Products
98
Chapter 7 SETUP mode
The SETUP mode of the VF-16 offers the “Changing the initial settings” menus, which configure the operating
environment of the VF-16, a “Check” menu that enables you to check the number of events for each track, and an
“Execution” menu that executes certain operations, such as save and load and disk formatting. The “Changing the
initial settings” menu include 20 parameters as shown in <Table-1> below. These parameters were set before the
VF-16 was shipped from the factory and these values are called the “initial settings.” Modifying these settings
allows you to change the operating environment of the VF-16. The “Check” menu provides two parameters “Checking
the number of events” as shown in <Table-2> - “Checking the number of events” and “Checking the current drive
information.”
Also, as shown in <Table-3>, the “Execution” menus include five items: Title Edit, Delete PGM, Load PGM, Save PGM,
and Disk Format, which you can execute by selecting the corresponding SETUP menu. This chapter explains how to
use the “Changing the initial settings” menus shown in <Table-1> and the “Check” menu shown in <Table-2>.
For more information on the “Execution” menus, refer to the corresponding pages in the “Reference page” column
in <Table-3>.
<Table-3> “Execution” menu
Execution item Display Refer page Community
Editing a program title Title Edit 62 -
Deleting a program Delete 62 -
Saving song data to an external device Load PGM 80 -
Loading song data from an external device Save PGM 80 -
Formatting an current drive disk Disk Format 21 -
<Table-2> “Check” menu
Check item Display Refer page Community
Check of the event number on the track Number Of Event 109 -
Check of the current drive information Drive Information 110 -
<Table-1> “Changing the initial settings” menu
Parameters Display Default setting Refer page Community
Setting a time signature Signature Set 001BAR 4/4 99
Setting a tempo Tempo Set 001BAR 1 120 100
Setting the metronome function Click Off 102
Setting a preroll time Preroll Time 00s 103
Setting MIDI sync output signal Midi Sync Out MTC 103
Setting an MTC frame rate Frame Rate 25 frame 104
Setting an MTC offset value Mtc Offset 00h 59m 57s 00f 00sf 104
Setting the offset mode Offset Mode ABS 105
Setting the slave mode Slave Mode Off 105
Setting the slave type Slave Type Vari 106
Setting the record protect function Rec Protect Off 106
Setting digital input Digital In Analog 107
Setting digital output Digital Out SPDIF 108
Setting BAR/BEAT resolution mode Resolution Off 108
Setting the MIDI device ID number Device ID 00 109
Setting the drive Drive Select IDE 110 -
Setting the fader fix mode Fader Fix Off 111
Setting the fader recall mode Fader Recall Off 111
Setting the phantom power Phantom Power Off 112
Setting the compressor channel Comp. Channel Off 112
: Modes applicable program by program. They can be saved/loaded.
: Modes applicable to all program. They cannot be saved/loaded.