Filter
Top Products
57
<Notes>
• When executing the scene sequence, the fader positions
are recalled according to the fader recall mode in the
SETUP mode (the default is "Off"). For example, if you
set the fader recall mode to "CH & MST", both the
channel and master faders are automatically recalled
everytime the current scene changes. On the contrary,
if you set the fader recall mode to "Off" (the default
mode), fader positions are not recalled so you can
manually control fader positions as you like.
We suggest you to make sure to set the fader recall mode
suitably for your work before executing the scene
sequence. See page 109 for details about the fader
recall mode setting.
• When you do not use the scene sequence function, set
the scene sequence mode to OFF.
Deleting an event memory
You can delete unnecessary event memories.
<Note>
You cannot delete event memory 00.
1. While the VF-16 is stopped, press the [SCENE STORE/
MAP] key while holding down the [SHIFT] key.
The screen shows the event memory list.
2. Select the desired event memory using the [JOG] dial,
and press the [ENTER/YES] key.
The display shows the screen for selecting the scene
number for the selected event memory.
3. While the scene number is flashing, rotate the [JOG] dial
counterclockwise.
"EVT DEL" (Event Delete) flashes in the scene number
field, showing that the event memory selected above is
ready to be deleted.
4. While "EVT DEL" is flashing, press the [ENTER/YES] key.
The selected event memory is deleted and the screen
shows the event memory list.
5. Press the [EXIT/NO] key (or the [STOP] key).
The display returns to the Normal display.
Scene sequence mode on/off selection
You can turn on or off the scene sequence mode for
selecting whether or not executing the scene sequence
program using the scene event map.
1. While the VF-16 is stopped, press the [A RTN A PLAY/
SCENE SEQ] key while holding down the [SHIFT] key.
After "SCENE SQ: ON" is briefly shown on the screen, the
Normal display appears.
Each time you press the [A RTN A PLAY/SCENE SEQ] key
while holding down the [SHIFT] key, ON and OFF
alternates.
When the scene sequence mode is set to ON, the scene
number indicator on the Normal display is highlighted
(When OFF, it is not highlighted).
Executing the scene sequence
When the scene sequence mode is set to ON, the scenes
will be recalled according to the scene event map
during playback.
<Screen appearances during playback>
The following show the screen appearances during play-
back with the scene event map in which scene number
02 (with title "XXX") is recalled at 01m 30s and scene
number 05 (with title "YYY") is recalled at 05m 00s.
The unit starts playback with scene number 00 (Init Mix).
The unit recalls scene number 2 (XXX) at 01m
30s and continues playback.
The unit recalls scene number 5 (YYY) at 05m
00s and continues playback.
<Hint>
The unit continues playback with the scene number
recalled by the last event memory.
Therefore, if you want to recall scene number 00 again
after recalling scene number 05, you have to create the
last event memory that recalls scene number 00 at the
desired time.