Filter
Top Products
84
CAUTION
AVIS:
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
ST OUTAUX SEND
RL
IN OUT
MIDI DIGITAL / DATA FOOT SW
IN OUT
SCSI POWER AC-IN
DIGITAL
MULTITRACKER
flashing
flashing
Loading data using the S/PDIF or adat digital signal
You can load data using the S/PDIF or adat digital signal via the DIGITAL/DATA IN jack.
*Use an external device that supports 44.1 kHz sampling frequency (the same
as the VF-16)
Connecting to an external device
Connect the DIGITAL/DATA IN jack to the digital
output jack of the external digital device.
<Notes>
• The DIGITAL/DATA OUT jack accommodates either
the S/PDIF (optical) or adat digital signal selected.
Though the S/PDIF (optical) and adat digital signal
use the same connector shape, the signal formats are
different.
• Do not do anything, such as unplug the optical cable,
that interrupts the digital signal until the loading
operation is completed. Otherwise, the unit may
generates a noise which damages an external device.
• When using the S/PDIF signal, if your DAT only
provide the coaxial (RCA) digital input jack and does
not provide the optical jack, use the optional COP-1/
96kHz (optical/coaxial converter).
• Do not connect digital signals for both directions
between the VF-16 and the external device (i.e. the
digital output of the VF-16 to the digital input of the
external device and the digital output of the external
device to the digital input of the VF-16), which may
form a digital loop and cause feedback.
Setting the external device
1. Make preparations of the external device for outputting
the digital signal.
2. Locate the beginning of the pilot signal for the song
data.
*See the operation manual of the external device for
the detailed information.
Loading data
You can load data via the "Load PGM" menu in the
SETUP mode.
<Details about "Load PGM" menu>
•Input signal options: adat, S/PDIF and SCSI
•Program options:
P01 to P99 (an individual Program)
•Track options:
* When using S/PDIF or adat:
Tracks 1-8, Tracks 1-16, Tracks 1-24, Tracks 9-16,
Tracks 9-24 or Tracks 17-24.
* When using a SCSI disk:
All tracks (1-24) is selected automatically. (You can
select tracks individually when loading a WAV file).
1. Press the [SETUP] key to enter the Setup mode.
The display shows the screen for selecting the Setup
menu.
2. Use the [JOG] dial to select "Load PGM" and press the
[ENTER/YES] key.
The display shows the screen for selecting the device
from which the data is loaded. "SCSI" flashes.
3. Use the [REWIND] or [F FWD] key to select "SPDIF"
(or "adat") and press the [ENTER/YES] key.
The display shows the screen for selecting a load
destination program to which data is loaded.
A program number currently selected flashes, followed
by its program name. The data size of the current
program is also shown. When a program number is
flashing, you can select the desired load destination
program.
You can select a load destination program from existing
programs on the current drive as well as "New PGM".
When selecting "New PGM", a new program is created.