Filter
Top Products
Intel NetStructure
®
MPCMM0002 Chassis Management Module
July 2007 Hardware TPS
Order Number: 309247-004US 81
Safety Warnings—MPCMM0002 CMM
Warning: Avoid electric overload, heat, shock, or fire hazard: Only connect the
system to a to a properly rated supply circuit as specified in the product user manual.
Do not make connections to terminals outside the range specified for that terminal. See
the product user manual for correct connections.
Warning
: Avoid electric shock: Do not operate in wet, damp, or condensing
conditions. To avoid electric shock or fire hazard, do not operate this product with
enclosure covers or panels removed.
Warning
: Avoid electric shock: For units with multiple power sources, disconnect all
external power connections before servicing.
Warning: Power supplies must be replaced by qualified service personnel
only.
Caution
: System environmental requirements: Components such as Processor
Boards, Ethernet Switches, etc., are designed to operate with external airflow.
Components can be destroyed if they are operated without external airflow. External
airflow is normally provided by chassis fans when components are installed in
compatible chassis. Never restrict the airflow through the unit's fan or vents. Filler
panels or air management boards must be installed in unused chassis slots.
Environmental specifications for specific products may differ. Refer to product user
manuals for airflow requirements and other environmental specifications.
Warning
: Device heatsinks may be hot during normal operation: To avoid burns,
do not allow anything to touch heatsinks.
Warning: Avoid injury, fire hazard, or explosion: Do not operate this product in an
explosive atmosphere.
Caution
: Lithium batteries. There is a danger of explosion if a battery is incorrectly
replaced or handled. Do not disassemble or recharge the battery. Do not dispose of the
battery in fire. When the battery is replaced, the same type (CR2032) or an equivalent
type recommended by the manufacturer must be used. Used batteries must be
disposed of according to the manufacturer's instructions.
Warning
: Avoid injury: This product may contain one or more laser devices that are
visually accessible depending on the plug-in modules installed. Products equipped with
a laser device must comply with International Electrotechnical Commission (IEC)
60825.
18.1 Mesures de Sécurité
AVERTISSEMENT CONCERNANT LA SÉCURITÉ DE L'ALIMENTATION C.A. ET/OU
C.C. : le câble d'alimentation C.A. et/ou C.C. constitue le dispositif de déconnexion
principal de l'alimentation électrique de l'unité et doit être facilement accessible à tous
moments. Les commutateurs de marche/arrêt C.A. et/ou C.C. et/ou les commutateurs
disjoncteurs auxiliaires permettent uniquement de contrôler l'alimentation (ET NON LA
DÉCONNEXION PRINCIPALE).
Veuillez suivre les mesures de sécurité suivantes pour éviter tout accident corporel et
ne pas endommager ce produit ou tout autre produit lui étant connecté. Pour éviter tout
danger, veillez à utiliser le produit conformément aux spécifications mentionnées.
Lisez toutes les informations de sécurité fournies dans les manuels de l'utilisateur des
produits composants et veillez à bien comprendre les mesures associées aux symboles
de sécurité, aux avertissements écrits et aux mises en garde avant d'accéder à certains
éléments ou emplacements de l'unité. Conservez ce document comme outil de
référence.