Mark Levinson N40 Musical Instrument User Manual


 
1-14
Getting Started Mark Levinson
Power Requirements
Mark Levinson products are factory-set for 100V, 120V, 220V, 230V
or 240V AC mains operation at either 50 or 60Hz, based on the
country for which they are manufactured.
If you have more than one circuit feeding the system with power,
please ask your electrician to ensure that they are all operating with
a solid, low impedance ground reference that is the same for all
products in the system.
The operating voltage of the Nº40 cannot be changed by the user,
and any attempt to do so will void the warranty. If you need to
change the operating voltage of your Nº40, or if the voltage indi-
cated on the rear panel label is not available in your area, contact
your Mark Levinson dealer for assistance.
Break-in Period
Although your Mark Levinson Nº40 Media Console delivers
outstanding performance straight out of the box, you should expect
to hear it continue to improve as it reaches its normal operating
temperatures and its various components “break-in.” It has been
our experience that the greatest changes occur within the first 25-
50 hours, but that the system will continue to improve in sound
quality for about 300 hours, after which time it remains quite
constant.
The only exception to this rule is if power is removed from the unit,
allowing it to cool down. This can occur beacause of:
Extended power outages
Unplugging the product from the wall during a vacation
Using the front panel power buttons rather than one of the
standby buttons.
In these cases you should expect a brief warm-up period before the
sound quality is at its best. (Fortunately, you will never have to
repeat the full 300 hour break-in period.)
Operating States
The Nº40 has three operating states:
Off AC mains power is disconnected using the front
panel power button or by unplugging the unit
from the wall.
Standby The Nº40 is powered up, but audio outputs are
muted and video outputs are either off or fed a
“black screen” signal (sync but not picture infor-
mation).
On Everything is powered up and outputs are active.