Filter
Top Products
ERROR MESSAGES
111
APPENDICES
ERROR MESSAGES
ERROR MESSAGES
The GW50 monitors the battery voltage only
once (when the power is turned on), and if
there is a problem with the battery, one of
the following battery-related error messages
will appear.
This indicates that the voltage of the battery is
low. Have the battery changed by Yamaha service
personnel as soon as possible (see your nearest
Yamaha dealer). (Also refer to “PRECAUTIONS,”
page ii.)
This indicates that the voltage of the battery may
be too high because something is wrong with the
battery backup circuit. Have the GW50 serviced
by Yamaha service personnel as soon as possible
(see your nearest Yamaha dealer).
This indicates that the button pressed is inactive in
the current mode.
This appears when Pedal Wah has been selected in
the WAH + EQ effect, and the [L MID/SPEED]
knob is adjusted.
This is shown when the Edit Compare function has
been selected without any edits having been made
in the Memory Edit mode.
This appears when the Memory Edit mode is
active and some other incompatible operation
(such as selecting the Bulk Dump or Tuner func-
tions) has been attempted. Exit the Memory Edit
mode by pressing [MANUAL] or [MEMORY],
and then attempt the operation again. (Keep in
mind that doing this stores your recent edits to the
current program number.)
This appears when bulk data is received in the
Memory Job mode, or when some unavailable
operation or function has been attempted in this
mode. Exit the mode by pressing any of the mode
buttons.
This appears when bulk data is received in the Song
Job mode, or when some unavailable operation or
function has been attempted in this mode. Exit the
mode by pressing any of the mode buttons.