Filter
Top Products
ERROR MESSAGES
113
APPENDICES
ERROR MESSAGES
This appears when bulk data for a song is received
and data already exists for the destination song
number. Select an empty song or delete the current
song.
This appears when a pattern is playing and some
other incompatible operation (such as selecting the
Bulk Dump or Tuner functions) has been at-
tempted. Stop the pattern by pressing [START/
STOP], and then attempt the operation again.
This appears when a song is being played back or
recorded and some other incompatible operation
(such as selecting the Bulk Dump or Tuner func-
tions) has been attempted. Stop the song by press-
ing [START/STOP], and then attempt the opera-
tion again.
This appears when song data has somehow been
corrupted and made unreadable. The song or songs
in memory are cleared automatically. This mes-
sage appears only once when the power is turned
on.
This appears when the MIDI buffer is full (when
too much MIDI data is being received at one
time). When transmitting Bulk Data from the
MIDI storage device (such as the Yamaha MDF2
MIDI Data Filer), set a relatively long interval
time between data blocks on that device.
This appears when some error has occurred in data
reception or transmission. Check the MIDI cable
connections, and then attempt the operation again.