Filter
Top Products
52
EFFECT SECTION
MEMORY MODE
Note: When [MANUAL] is pressed, the bypass function is
automatically selected (the MEMORY LED in the AS-
SIGNABLE Block flashes). When [MEMORY] is pressed,
either the bypass function (LED flashes) or the effect
program selection function (LED is lit continuously) is
automatically selected, depending on the last setting
made.
Note: Whether the ASSIGNABLE Block is set for use as a
bypass switch (the MEMORY LED is flashing) or as a
bank/program selector (the MEMORY LED is lit con-
tinuously), you can also select the MINIMUM VOLUME
and AUTO VOLUME functions of the ASSIGNABLE
Block Pedal Switch. Either of these functions can be
performed with the ASSIGNABLE Block Pedal Switch
without disturbing the bypass or effect program
selection operations (excepting bank selection) of the
effect block Pedal Switches. (See pages 10, 11 for
more information.)
4. Press the ASSIGNABLE Block Pedal Switch
once to return to normal operation in the
Memory mode.
HINT
You can also use the external footswitch as
an total effect bypass switch to turn all
active effects on or off; see page 57 for
details.
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
Bypass Switching of Effect Blocks
The Pedal Switches can also be used to bypass or
activate individual effect blocks or the assigned
effect Group.
Operation —
1. In the Memory mode, press the Type switch
in the ASSIGNABLE Block until the
MEMORY LED is lit.
2. To select bypass operation, press the AS-
SIGNABLE Block Pedal Switch twice
quickly.
MEMORY MODE
3. In this condition, the Pedal Switches can be
used as bypass on/off switches. Those effect
blocks as part of a group can be switched on
and off together, while those not part of a
group can be switched on and off individu-
ally. The LEDs of the effect blocks are lit in
red when the effects are on.
LED flashes.
Press twice quickly.