Filter
Top Products
46
EFFECT SECTION
MANUAL MODE
Note: VOLUME PEDAL PLACEMENT—Since placing the
Volume Pedal before the Equalizer may result in
some added noise, generally it should be used
after the Compressor, Distortion and Equalizer
except when using it to control the Distortion
Input level.
grouped together, pressing any of those Pedal
Switches alternately bypasses or activates all those
effects simultaneously.
Operation —
1. From the Manual mode, repeatedly press the
Utility button until “GROUP” is shown in the
display.
2. Press the Effect Selector buttons (CMP, DST,
EQ, etc.) corresponding to the effect blocks
you wish to assign to the group.
Setting the Function of the External Foot
Controller — FOOT
The Foot function here determines how the con-
nected foot controller (the optional Yamaha FC7)
is to be used: whether for realtime control over
certain effect parameters, or as a volume pedal.
Operation —
1. From the Manual mode, repeatedly press the
Utility button until “FOOT” is shown in the
display.
2. Repeatedly press [SET-B] (the Foot Control-
ler button, indicated by the pedal graphic on
the panel) to step through the settings. The
available settings are: Volume Pedal, Wah
Pedal, Distortion Drive, Chorus Depth,
Reverb Feedback, and Reverb Mix.
■ Using as a Volume Pedal
Volume Pedal (VOL PEDAL) — For using the
foot controller to control the volume of the
input signal, at programmable points in the
effect chain. Each press of [SET-B] steps
through the various positions.
MANUAL MODE
When MEMORY ON/OFF is selected in the
ASSIGNABLE Block (MEMORY LED
flashes), the assigned effect blocks can be
switched on and off all together by pressing
any one of their Pedal Switches. Unassigned
effects can be switched off and on normally
from their individual Pedal Switches.
To turn off the group assignment, press the
appropriate Effect Selector button again.
Repeat steps #1 and #2 above if you want to
change the assignment again.
The dark bars at the top of the graphic boxes indicate each
selected effect block.
The pedal graphic in the LCD shows the selected position
of the volume Pedal.