Filter
Top Products
APPENDICES
ERROR MESSAGES
112
ERROR MESSAGES
This appears when Song recording is in standby
and some other incompatible operation (such as
selecting the Bulk Dump or Tuner functions) has
been attempted. Exit the Song recording by press-
ing [SONG/PATTERN], and then attempt the
operation again.
This appears when the Compare condition is still
active and some other incompatible operation
(such as selecting the Bulk Dump or Tuner func-
tions) has been attempted. Exit the Compare
function by pressing [MANUAL] or [MEMORY],
and then attempt the operation again. (Keep in
mind that doing this recalls the original effect
program to the current program number.)
This appears when bulk data is received or some
other incompatible operation is executed while the
Tuner function is active. Exit the Tuner mode by
pressing any of the mode buttons (or any of the
Pedal Switches).
This appears when bulk data is received or some
other incompatible operation is executed in the
MIDI Bulk transmission mode.
This appears when bulk data is received or some
other incompatible operation is executed while the
Demo mode is selected. Exit the Demo mode by
pressing any of the mode buttons.
This appears when attempting to transmit an
empty song using the Bulk Dump function, or
when attempting to playback an empty song.
This appears when attempting to start a song from
a point beyond the end measure.
This appears when the song memory is full. Delete
any unnecessary song or songs.
This appears when attempting to create a song
over the 299-measure limit.
This appears when attempting to input a pattern
number to a position in the song other than the
beginning of a measure (in Step recording).