Filter
Top Products
PANEL CONTROLS AND TERMINALS
7
PANEL CONTROLS AND TERMINALS
• With [SHIFT]: For calling up Noise
Gate effect parameter. (See pages 31, 69.)
This also calls up the sub parameters of the
Equalizer, Chorus and Reverb/Delay effects.
(See page 44.)
8~# Position Control Buttons
8~@ Effect Selector Buttons
8CMP/<< (SONG NAME)
• After pressing [SHIFT] + [SUB PARAM]:
Calls up Noise Gate parameter.
• In Connect and Group functions: Selects
Compressor effect block.
• In Song mode: For moving to the top of the
current or last measure. Hold down for rapid
operation.
• In Song mode, with [v]: For returning to the
beginning of a song.
9DST/< (MEAS DEL)
• After pressing [SHIFT] + [SUB PARAM]:
Calls up Noise Gate parameter.
• In Connect and Group functions: Selects
Distortion effect block.
• In Song mode: For moving backward in 16th-
note steps. Hold down for rapid operation.
• In Song mode (with [SHIFT]): For deleting a
selected range of measures from a song.
• In Song mode, with [n]: For returning to the
beginning of a song.
0EQ/> (MEAS COPY)
• After pressing [SHIFT] + [SUB PARAM]:
Calls up Equalizer Sub parameters.
• In Connect and Group functions: Selects
Equalizer effect block.
• In Song mode: For moving forward in 16th-
note steps. Hold down for rapid operation.
• In Song mode, with [>>]: For moving to the end
(last recorded event) of a song.
• In Song mode (with [SHIFT]): For copying a
selected range of measures in a song.
4MANUAL (TUNER)
• For selecting the Manual mode. Pressing this
button in any operating condition calls up the
Manual mode.
• With [SHIFT]: For selecting the Tuner
function. (See pages 39, 99.)
5MEMORY (COPY/NAME)
• For selecting the Memory mode. Pressing this
button in any operating condition calls up the
Memory mode.
• With [SHIFT]: For calling up (and toggling
between) the Effect Copy, Effect Swap and
Effect Name operations.
6EDIT/COMPARE (MIDI BULK)
• In Memory mode: Selects the Memory
Edit mode, and serves as a Compare switch to
toggle between the newly edited settings of an
effect program and its original settings (the
LED flashes in the Compare condition). (See
pages 29, 53.)
• With [SHIFT]: For calling up the MIDI
Bulk Transmission operation. (See page 102.)
7Effect Utility Switch
(CONNECT … AUTO VOL)/(SUB PARAM)
• For selecting the miscellaneous Utility func-
tions of the GW50:
■ CONNECT — For determining the order of
the effect blocks. (See page 45.)
■ GROUP — For simultaneously switching
several effect blocks on/off. (See page 45.)
■ FOOT (Foot Controller) — For determin-
ing how the optional FC7 Foot Controller is
used. (See pages 46, 47.)
■
MIN VOL (Minimum Volume) — For deter-
mining the minimum volume setting for the
optional FC7 Foot Controller and the ASSIGN-
ABLE Block Pedal Switch (which can be used
to instantly change between minimum and
maximum volume). (See page 47.)
■ AUTO VOL (Auto Volume) — ASSIGN-
ABLE Block Pedal Switch can be used to
gradually fade up volume at the rate set here.
(See page 49.)