Filter
Top Products
SONG MODE
102
MODIFY VELOCITY - Pressing [F4] ( Vel ) accesses
Modify Velocity, which lets you modify the note-on
velocity values for all note events of selected tracks in a
specified range of measures.
SELECT TRACKS (1 ~ 16) - Press the TRACK
buttons of the tracks whose velocity you wish to
modify.
MEASURES (001 ~ 999) - Specify the first (left
field) and last (right field) measures in the range of
measures whose velocity you wish to modify.
RATE (1% ~ 200%) - All note-on velocity values
will be multiplied around the central value of 64 by
the specified percentage. A rate of 100% will result
in no change. A rate of 200% will move all velocity
values further away from 64; i.e., it will expand the
dynamic range. A rate of 0% will set all velocities to
the central value of 64; i.e., it will compress the
dynamic range.
OFFSET (-99 ~ +99) - The specified offset will be
added to all note-on velocity values.
NOTE: The rate and offset settings can be used
separately or together. First the value is multiplied by
the specified rate, and then the offset is added. If you
want only to add an absolute value to each velocity, set
the rate at l00% so it will have no effect. If you want only
to modify each velocity around the central value of 64,
then set the offset at 0 so it will have no effect.
EXECUTE - To execute the operation press ENTER.
NOTE: Each note event in a track has a note-on velocity
which determines the force with which the note is
played. The velocity has a range of 1 ~ 127, so the
modify velocity operation cannot increase or decrease
the velocity beyond these values.
TRANSPOSE - Pressing [F5] ( Trans ) accesses
Transpose, which lets you transpose all notes of the
selected tracks in a specified range of measures by a
designated interval.
SELECT TRACKS (1 ~ 16) - Press the TRACK
buttons of the tracks that you want the transpose
applied to.
MEASURES (001 ~ 999) - Specify the first (left
field) and last (right field) measures of the range of
measures you wish to transpose.
INTERVAL (-99 ~ +99) - The note number of all
notes will be transposed by the specified interval.
Settings of +1~ +99 will transpose up, and settings of
-l ~ -99 will transpose down. The note number is
limited to a range of 0 (C-2) to 127 (G8), and the
note numbers resulting from the transpose operation
will not exceed these limits.
EXECUTE - To execute the operation press ENTER.