Filter
Top Products
VOICE MODE
124
MIDI CONTROL 1/2 - To specify the status of the two
MIDI Control functions for each element, and the MIDI
Control settings which affect all elements equally, from
within the Controller parameters function, press [F7]
( MC1 ) or [F8] ( MC2 ) .
MIDI CONTROL 1/2 (off, on) - Position the
cursor over the MC1 (or MC2 ) status field and
use the JOG or INC/DEC to switch MIDI Control on
or off for each element.
BY (off, 1 ~ 119 excl. 32) - Position the cursor
over the By number field and use the JOG, INC/
DEC or the KEYPAD to designate the type of control
change message that will affect the parameter (for all
elements equally) as specified in the To number
field (see below).
TO (0 ~ 29) - Position the cursor over the By
number field and use the JOG, INC/DEC or the
KEYPAD to specify the parameter that will be
controlled by the control change as specified in the
By number field (see above).
MIN/MAX (0% ~ 100%) - Position the cursor over
the Min or Max value field and use the JOG,
INC/DEC or the KEYPAD to determine the range
that the parameter will respond to the MIDI control
message.
DRUM VOICE EDIT MODE
Drum Voice Edit Mode lets you construct your own drum
kits.
● ENTERING AND EXITING DRUM VOICE EDIT
MODE
To enter Drum Voice Edit Mode, from within Track 10 (the
drum voice track) or the track to which a drum voice is
assigned, press the VOICE EDIT button. The screen will
display a menu of the four main drum voice editing
functions. To exit the Voice Edit Mode, simply press EXIT
or any other MODE button.
● ACCESSING VOICE EDIT PARAMETERS
To access the drum voice edit parameters, use the function
keys [F1, F2, F6, F8] which correspond to the names of the
edit functions at the bottom of the screen, or use the
CURSOR keys to position the cursor over the various
parameter name blocks in the display, followed by ENTER.
You can also access the respective drum voice edit param-
eters by pressing TRACK buttons [9, 10, 14, 16]. From
within any voice edit function you can jump directly to
another voice edit function by holding down the SHIFT key
and pressing the appropriate function key.
COMMON - For accessing those parameters common
to all drum sounds in the voice, including volume,
name and initialize.
KEY - For assigning an element to each key number (C0
~ C6), plus setting each element s volume, pan, tuning
and System Effect send level.
EFFECT - For determining Insertion Effect type,
parameter, control and on/off status, plus the system
effect send level for the voice.
CONTROL - For determining the function and status of
the MIDI control and expression low limit.
To (Parameter Assign)
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
off
Ins.EF *1
Sys.EF1 Send
Sys.EF2 Send
Sys.EF3 Send
Amp Level
Amp Vel Sens
AEG Attack
AEG Decay *2
AEG Release
Filter Cutoff
Filter Resonance
Filter Band
Filter Vel Sens
FEG Attack
FEG Decay *2
FEG Release
PEG Vel Sens
PEG Attack
PEG Decay *2
PEG Release
Elem Random
Elem Tune
Elem Pan
Elem Exp Low Limit
LFO Speed
LFO Delay
LFO PMD
LFO AMD
LFO FMD
*1 The same as the parameter set in the Insertion Effect Control.
*2 May be different from the Decay 1 change.
To (Parameter Assign) To (Parameter Assign)
The Parameters that will be controlled