Filter
Top Products
UTILITY MODE
144
INITIALIZE
The initialization process sets all Internal normal voices to their basic initial values. The
Internal AWM element and other normal voice settings will be cleared and each voice will
be initialized as a one-element sine wave voice i.e., the status you will want when
creating a voice from scratch. The two Internal drum voice memories will simply be
assigned GM Drum Voice #01 and #02, respectively.
VOICE BULK DUMP
The Voice Bulk Dump function lets you transmit the entire bank of Internal 128 normal
voices and 2 drum voices currently stored in the W5/W7 to another W5/W7 or to external
MIDI devices.
● ACCESSING INITIALIZE
To access the Initialize function, from within the Utility
Mode main menu screen, position the cursor over INITIAL-
IZE and press ENTER, or simply press [F2] ( Init ). The
Initialize screen will appear.
INITIALIZING INTERNAL VOICE BANK - To
initialize the internal voice bank, press ENTER. The W5/
W7 will give you a chance to change your mind, asking
Are You Sure? Press DEC to abort the operation, or
INC to initialize the bank. The Executing message
will appear briefly, indicating that the initializing
operation is underway. When finished, the message will
change to Completed!
NOTE: Before executing the
operation, the W5/W7 s MIDI OUT
jack must be connected to the MIDI
IN of the external device by a MIDI
cable, and the device number for both
instruments must be set to the same
number. (For information about
setting the W5/W7s device number,
see page 148.)
● ACCESSING VOICE BULK DUMP
To access the Voice Bulk Dump function, from within the
Utility Mode main menu screen, position the cursor over
VOICE BULK DUMP and press ENTER, or simply press
[F3] ( Bulk ). The Voice Bulk Dump screen will appear.
DUMPING INTERNAL VOICE BANK - To dump the
Internal voice bank, press ENTER. The W5/W7 will give
you a chance to change your mind, asking Are You
Sure? Press DEC to abort the operation, or press INC to
initiate the voice dump process. Each voice will count
off as it is dumped. When finished, the message will
change to Completed!
● RECEIVING BULK VOICE DATA
To receive voice bulk data into the W5/W7 from an external
device, first cease song recording, song editing, or voice
editing operations. Set the device number for both instru-
ments to the same number. Then initiate the voice bulk
dumping process from the external device.