Filter
Top Products
SONG MODE
95
After entering a function within a particular Job number,
the menu of functions for that Job number will display at
the bottom of the screen, so you can jump directly to any of
them by pressing the corresponding function key, without
having to return to the main menu or press SHIFT.
From within a particular Job, SHIFT lets you jump directly
to one of the Job menus. To do so, while holding down the
SHIFT key, press a function key [F2 ~ F4] corresponding to
the Job menu you want to access.
NOTE: Attempting to perform certain Job functions may
cause various warning messages to appear on the screen. For
example, exceeding the internal song memory capacity will
result in the Song memory full! message; trying to execute
an illogical operation like copying a song to itself will result
in the Illegal data! message; if the source song/track
contains no data, the Data empty! message may appear.
SONG JOB
In Song Job Mode you can make changes to the sequence that apply to all data in one or
more measures. Song Job operations include song copy, append and clear, track copy, clear
and mix, measure copy, erase, create, delete and insert, data thin out, extract and chord sort,
plus quantize, move clock, modify gate time, modify velocity, transpose, shift note, and
crescendo.
● ENTERING AND EXITING SONG JOB MODE
To enter Song Job Mode, press the JOB button in the Mode
section on the panel. A list of jobs (Job 1, Job 2, or Job 3)
will appear, depending on which was accessed the last time
Song Job Mode was exited. To exit Song Job Mode, simply
press EXIT, or any MODE button on the panel.
● UNDO/REDO
Any time you execute an operation and then change your
mind, you can
undo
it so long as you press [F7] ( Undo )
while holding down SHIFT,
before
pressing any other
button. If you want, you can
redo
the operation as the
screen indicates.
● MOVING AROUND IN JOB MODE
From within any of the three main Job menus, pressing
SHIFT will display the list of functions in the selected Job
(1, 2, or 3) along the bottom of the display, so you can
jump straight to a particular function in the Job number
without having to position the cursor and press ENTER. To
jump to a function, while holding down the SHIFT key,
press the function key that corresponds to the function you
want to access.