Filter
Top Products
SONG MODE
94
PROGRAM CHANGE - While holding SHIFT, press
[F2] ( PC ) to insert a program change message at the
specified location. Select the program change number
with JOG or INC/DEC, then press ENTER.
PITCH BEND - While holding SHIFT, press [F3]
( PB ) to insert a pitch bend at the specified location.
Select the value with JOG or INC/DEC, then press
ENTER.
CONTROL CHANGE - While holding SHIFT, press
[F4] ( Ctrl ) to insert a control change message at the
specified location. Select the control change with JOG or
INC/DEC, then press ENTER.
AFTERTOUCH - While holding SHIFT, press [F5]
( AT ) to insert an aftertouch event at the specified
location. Select the value with JOG or INC/DEC, then
press ENTER.
SYSTEM EXCLUSIVE - While holding SHIFT, press
[F6] ( EX ) to insert a system exclusive message at the
specified location.
NOTE: The System Exclusive message for setting General
MIDI to on status is as follows: F0 (fixed) — 126 (7E) — 127
(7F) — 9 (09) 1 (01) — F7 (fixed).
● ACCESSING DATA INSERT TEMPO TRACK
To access the Data Insert Tempo Track function, from
within Data Change Sequence Track, press [F2] ( Tempo ),
then select [F4] ( Ins ). The Data Insert Tempo Track screen
will appear.
TEMPO CHANGE - To insert a tempo change any-
where in the song, first locate the specific point in the
song by measure, beat and clock, then position the
cursor over the Value field and use the JOG, INC/DEC
or KEYPAD to select a tempo value, then press ENTER.
(NOTE: The value will only have an effect if the W5/
W7 s sequencer is synchronized to its own internal
clock.)
TRACK NUMBER
Indicates the currently selected track. To select a track,
press a TRACK button (1 ~ 16) on the panel. (NOTE:
Selecting a different track from within Data Insert will
automatically engage the Data Change function.)
MEASURE BAR
The horizontal line represents one measure, and the
vertical divisions each represent one beat.
POSITION POINTER
As you change the value of the beat or clock, a down-
ward-pointing arrow will move in 32nd note steps to
visually indicate the current position in the measure.
MEASURE NUMBER
Indicates the current measure represented by the
measure bar.
BEAT
For accessing a specific beat.
CLOCK
For accessing a specific clock.
● INSERTING DATA
To insert data, press SHIFT to display the types of data you
can insert, then, while holding SHIFT, choose the type of
data you want to insert by pressing a function key [F1 ~
F6].
NOTE - While holding SHIFT, press [F1] ( Note ) to
insert a numeric note value, gate value and velocity
value at the specified location. Select the value of each
with JOG or INC/DEC, then press ENTER. When the
cursor is positioned at the note number, the note
number can easily be inserted by pressing the desired
key on the keyboard while holding down [F4] ( Ins ).