Filter
Top Products
SONG MODE
82
SONG SETUP
The Song Setup function lets you assign various MIDI
settings including transmit channel, MIDI filter and control
status, as well as designate keyboard mode, set the sequencer
clock to internal or MIDI sync, and set overall transposition.
● ACCESSING SONG SETUP
To access the Song Setup function, from within Song Mode,
press [F3] ( Setup ). One of the Song Setup function
displays will appear Playback Filter, Track Transmit
Channel, Keyboard Setup, or Other Setup depending on
which was selected the last time you exited the Song Setup
function.
MIDI FILTER - Pressing [F5] ( Filter ) accesses the MIDI
Filter, from where you determine how the W5/W7 re-
sponds to various MIDI data.
Through the MIDI Filter, the W5/W7 s internal sequencer
can receive Aftertouch, Control Change and System
Exclusive messages when these parameters are set to rec
status. The W5/W7 s internal sequencer can send Bank
Select, Program Change and Control Change messages
when these parameters are set to play status. When a
parameter is set to ignore status, the W5/W7 will not
acknowledge these messages.
To select a MIDI Filter parameter, use the CURSOR-UP and
CURSOR-DOWN keys. to change a parameter setting, use
the JOG or INC/DEC.
TRACK TRANSMIT CHANNEL - Pressing [F6] ( T.Ch )
accesses the MIDI transmit channel display, from where you
can turn MIDI transmit channels on and off, or assign the
transmit channel for each W5/W7 track.
TRACK NUMBER (1 ~ 16) - The first line of informa-
tion is a row of numbers which represent each track
number, and therefore cannot be changed.
EXTERNAL ON/OFF (ext) - The second line of
information represent the on/off switches for each track
that determine whether W5/W7 MIDI data will be
transmitted to external devices. A dot means the track is
turned on, and a horizontal line means the track is
turned off. To set External On or Off for a track,
position the cursor over the field just below the number
of the track you want to set, and use the JOG or INC/
DEC.
INTERNAL ON/OFF (int) - The third line of informa-
tion represents the on/off switches for each track that
determine whether W5/W7 MIDI data will be transmit-
ted to the internal tone generator. A dot means the track
is turned on, and a horizontal line means the track is
turned off. To set Internal On or Off for a track, posi-
tion the cursor over the field just above the number of
the track you want to set, and use the JOG or INC/DEC.
MIDI TRANSMIT CHANNEL (1 ~ 16) - The fourth
line of information is a row of numbers which represent
the MIDI channel the track is transmitting on. The MIDI
transmit channel of each track can be changed freely. To
change the MIDI transmit channel number, position the
cursor over the transmit channel number field corre-
sponding with the track whose transmit number you
want to change, and use the JOG, INC/DEC or KEY-
PAD.
NOTE: Changing a transmit channel affects the way tracks
respond in Song Multi Play Mode. For example, if you
change the transmit channel of Track 4 to MIDI channel 1,
pressing the TRACK 4 button in Song Multi Play Mode will
cause the cursor to automatically position itself at Track 1
within the mixer.
KEYBOARD SETUP - Pressing [F7] ( Kbd ) accesses the
four keyboard setup modes, from where you determine
whether the W5/W7 s keyboard will operate in Normal,
Split, Layer, or 4-Zone modes.
To access one of the keyboard setup modes, use the JOG or
INC/DEC.