Filter
Top Products
SONG MODE
92
SEQUENCE/TEMPO TRACK DATA
CHANGE
The Sequence Track Data Change function lets you single
out individual events and modify them. The display will show
the type and numerical values for each event. All data in the
selected track will be displayed numerically. You can change
the values of existing data, or delete the currently displayed
data. You can also access the Data Change Tempo Track
function to view a list of the locations of tempo changes within
the song.
● LOCATING DATA
To move around in Data Change and locate the data you
want to change, you can conveniently scroll back and forth
through the data in the measures, using the SHUTTLE. You
can also scroll using CURSOR-UP and CURSOR-DOWN.
To access a specific event to change, use the CURSOR keys.
● CHANGING DATA
There are three ways to change data: (1) input a new value
for the specified data; (2) move the specified data from one
measure to another within the song, or from one beat to
another within a measure; and (3) delete the specified data.
NEW DATA VALUE - After positioning the cursor at a
specific data location, input a new value using the JOG
and INC/DEC, and if the event is a numerical value, use
the KEYPAD (all three data input methods must by
followed by ENTER in order to execute the change)
DATA MOVE - Position the cursor over the measure/
beat of the specific event you want to move. Then, using
the KEYPAD, punch-in the new measure/beat number,
followed by enter.
DATA DELETE - To delete a selected event, simply
press [F8] ( DEL ).
● ACCESSING DATA CHANGE
To access the Data Change function, from within Song Edit
Mode, press [F5] ( Chng ). The Data Change function
screen will appear.
TRACK NUMBER
Indicates the currently selected track. To select a track,
press a TRACK button (1 ~ 16) on the panel.
MEASURE NUMBER
Indicates the currently selected measure in the track.
BEAT
Displays the beat number of the measure.
CLOCK
Displays the clock value of the beat.
TIME
Displays the time signature of the current measure in the
track.
NOTE: You cannot change the time signature from within
Sequencer Track Data Change. You can change the time
signature in the Create Measure function of Song Job Mode.
(For information, see page 98.)
TOP OF TRACK/END OF TRACK
Indicates the beginning or end of the track, the display
will show Top of Track or End of Track .
MEASURE MARK ( Measure Bar )
Indicates the beginning of the measure.