Filter
Top Products
GETTING STARTED
53
5. LOAD THE DEMONSTRATION SONGS
Press ENTER and the W5/W7 will give you a chance to change your mind, asking
Are You Sure? . Press DEC to abort the operation, or press INC and the demon-
stration songs will begin loading. As they do, the screen will display the Execut-
ing message. When the loading operating is finished, the Completed!
message will appear briefly before returning to the previous display.
6. SELECT A DEMONSTRATION SONG
Before you can play the demonstration song you must return to Song Play Mode.
Press SONG in the Mode section on the panel to leave Disk Mode and return to
Song Play Mode.
Before you can select a demonstration song, you must switch to the Song Se-
quence Play function. Press function key [F2] ( Seq ) and the Song Sequence Play
function screen will appear.
Position the cursor over the Song number and press INC/DEC (or use the JOG)
to select a song.
7. PLAY THE DEMONSTRATION SONG
In Song Multi Play Mode, the TRACK buttons should indicate which tracks have
sequencer data in them. Green Track buttons will signify that there is data in the
track. (The red Track button is the currently selected track.) Unlit TRACK buttons
signify that there is no data in the track.
Press the RUN button in the Sequencer section on the panel and the song will
begin playing.
8. EJECT THE DISK
When you ve finished loading the demonstration songs, press the eject button on
the disk drive to eject the Factory Set & Demonstration disk. Store the disk in a
safe place for future reference.
NOTE: the sequencer will not run
when you are in Disk, Utility, Song
Edit, or Song Job modes.
NOTE: To access the Song
Directory and view a list of the
songs loaded into the W5/W7, press
[F8] ( Dir ). Positioning the cursor
over a song name in the list, then
pressing ENTER will select the
song. Likewise, you could punch in
the song number on the KEYPAD,
followed by ENTER, to select a
song.
NOTE: If you want, you can play
along with the demo. Just press a
green TRACK button to play on top
of one of the parts, or press an unlit
TRACK button to play with an
Instrument voice not used in any of
the parts. If you want to stop
playback before the song is finished,
press the STOP/TOP button once.
To resume play from that point,
press RUN again. To reset the song
at the first measure, or the top of
the song, press STOP/TOP twice.
Then pressing RUN again will start
the song from the beginning. You
can also fast-forward and rewind
through the song as it plays, using
the SHUTTLE dial.