Filter
Top Products
Model LR16 [Names and functions]
27
Control unit (rear panel)
1
Main unit (front panel)
(1) [TO CONTROLLER] connector
Used to connect to the [CONTROLLER]
connector of the main unit using the supplied
(or a different) CAT5 cable.
1
23
11
5
6
47
89
10
(1) Display
Displays the input/output level of audio
signals or project information.
(2) [EXIT/NO] key
Used to exit the MENU mode or cancel the
setting in the MENU mode.
(3) [MENU/ENTER] knob
This knob has two functions. Rotating this knob
functions as the [MENU] dial, while pressing
this knob functions as the [ENTER] key.
In this manual, we describe it as the "[MENU]
dial" or "[ENTER] key" depending on whether
you use it by rotating it or pressing it.
[ENTER] key function:
Pressing it while the recorder is stopped enters
the MENU mode. It is also used to confirm a
setting or execute a function in the MENU mode.
[MENU] dial function:
In the MENU mode, rotating it selects an
option or enters an alphanumeric character for
a name.
While the Home screen is shown, you can
adjust the display contrast by rotating it.
(4) Numeric keys
Pressing a numeric key performs instant start
of a mixed file set to the memory play list.
When you enter/edit a name (for example,
when editing a project name via the "Rename"
menu item in the "Project" menu of the MENU
mode), you can enter a desired character by
using an appropriate key.
(5) [CLEAR] key
When you edit a name (for example, when
editing a project name via the "Rename" menu
item in the "Project" menu of the MENU mode),
you can delete a character. When you edit time
data, you can reset the time value.
(6) [MEMORY STOP] key
Stops playback in memory play mode.
This key does not work except in memory play
mode.
(7) [MEMORY SETUP] key
Pressing this key enter the memory setup mode,
in which you can make setting required for
memory play.