Filter
Top Products
73
Model LR16 [Recorder functions / Project management]
(3) Use the [MENU] dial to highlight "Delete"
and press the [ENTER] key.
The display now shows the project list
screen.
(4) Use the [MENU] dial to select the project
you want to delete and press the [ENTER]
key.
For example, if you select project 003
("PROJ003"), the confirmation screen as
below is shown.
To cancel the delete operation, press the
[EXIT/NO] key. The display returns to the
previous screen.
(5) While holding down the [RECORD] key,
press the [ENTER] key to delete the project.
The display shows the project list screen
which does not contain the deleted project
(PROJ003 in this example). Projects after the
deleted project (PROJ004 and PROJ005 in
this example) move up in the list, as shown
below.
(6) Press the [STOP] key or repeatedly press
the [EXIT/NO] key to exit the MENU mode.
<Note>:
When you delete a project, the record-
able remaining space does not increase imme-
diately. It increases after turning off the power
and then on again.