Filter
Top Products
71
Model LR16 [Recorder functions / Project management]
On this screen, stereo mix files in the
"2 mix" folder of the current project are
listed up.
In the screen example above, two stereo mix
files exists.
(4) Select the file(s) to be exported.
You can export any desired file(s) or all files.
<Selecting a desired file>
By using the [MENU] dial to select a desired
file and pressing the [ENTER] key, you can
put a checkmark to the left of the file name,
while the volume of the selected file is shown
on the right of "-File select-".
By repeating the operation above, you can
put a checkmark to another file.
<Selecting all files>
By pressing the [ENTER] key while
"[All select]" is highlighted, a checkmark is
put to every file as below.
(5) Use the [MENU] dial to highlight
"[EXECUTE]" at the bottom and press the
[ENTER] key.
<Memo>:
To deselect a file, highlight a
desired file with a checkmark and press
the [ENTER] key. The checkmark is re-
moved.
(3) Use the [MENU] dial to highlight
"Export ST mix" press the [ENTER] key.
After the LR16 checks the USB memory, the
display shows the "export 2 mix" screen.
<Note>:
If the data of a project with the
same name exists on the USB memory
stick when you attempt to execute ex-
porting the project data by pressing the
[ENTER] key, the following popup ap-
pears.
To overwrite the existing data, press the
[ENTER] key. If you do not want to over-
write the existing data, press the [EXIT/
NO] key to cancel exporting data.
The LR16 starts exporting data to the USB
memory stick and the display shows the
progress. The display also shows the ap-
proximate finish time and remain size of
the USB memory stick.