Filter
Top Products
64
Model LR16 [Recorder functions / Mark function]
(4) Use the [MENU] dial to highlight
"<Position>" and press the [ENTER] key.
The flame digit of the time data for the
selected mark starts flashing.
(5) Edit the time data in the following manner.
Use the [REWIND] or [F FWD] key to move
the cursor (flashing point) to the desired
digit to be edited.
Use the [MENU] dial or numeric keys to
enter the desired value at the flashing point.
Pressing the [CLEAR] key resets the time data
to "00h00m00s00f".
You can set any of the following values to
each digit.
Hour digit: 00 through 23
Minute digit: 00 through 59
Second digit: 00 through 59
Flame digit: 00 through 24 (or 00 through 29)
6) Press the [ENTER] key to confirm the
duration setting.
7) Press the [STOP] key to exit the MENU
mode.
Deleting a mark
(1) Press the [ENTER] key to bring up the
MENU screen.
When you bring up the MENU screen for
the first time, "Mark point" is highlighted.
(2) While "Mark point" is highlighted, press the
[ENTER] key.
The display now shows the mark list screen.
(3) Use the [MENU] dial to highlight a desired
mark point to be deleted and press the
[ENTER] key.
The display now shows the edit screen for
the selected mark.
(4) Use the [MENU] dial to highlight "<Delete>"
and press the [ENTER] key.
The display returns to the mark list screen
on which the time data for the deleted mark
shows "--h--m--s--f". You can set this mark
again by the procedure described in
"Adding a mark via the mark list screen"
on page **.
5) Press the [STOP] key to exit the MENU
mode.