Filter
Top Products
78
Model LR16 [Recorder function / Other functions]
Formatting the internal hard disk
You can format the internal hard disk of the
main unit. Formatting the internal hard disk
erases all the data on the disk.
<Note>:
Formatting the internal hard disk
erases all the data on the disk.
Before you format the hard disk, back up
the necessary data by copying to a hard disk
of your personal computer or an external
USB memory stick, etc. (See page 74 for de-
tails about how to copy data to your per-
sonal computer and page 68 for detail about
how to copy data to a USB memory stick.)
(1) Press the [ENTER] key to bring up the
MENU screen.
When you bring up the MENU screen for
the first time, "Mark point" is highlighted.
(2) Use the [MENU] dial to highlight "System"
and press the [ENTER] key.
The display now shows the system menu
screen.
(3) Use the [MENU] dial to highlight
"Disk Format" and press the [ENTER] key.
The confirmation screen as below is shown.
(4) While holding down the [RECORD] key,
press the [ENTER] key.
DIsk formatting starts and the display as
below is shown. When disk formatting is
completed, the display shows "Completed!".
(5) Press the [ENTER] key.
The LR16 exits MENU mode and the
display shows the Home screen of an empty
disk as below.
Initializing the system memory
You can initialize the system memory in the
internal flash ROM and revert the following
system setting items back to the default con-
dition.
(1) Press the [ENTER] key to bring up the
MENU screen.
When you bring up the MENU screen for
the first time, "Mark point" is highlighted.
(2) Use the [MENU] dial to highlight "System"
and press the [ENTER] key.
Default
Setting items
Assign Sub In
Default Frame
Foot SW
Default FS
Disk Protect
<Memo>: To cancel disk formatting,
press the [STOP] key.
Contrast level -
Assign MemPlay