Filter
Top Products
47
Model LR16 [Recorder functions / Recording/playback]
<Recording to tracks 1 through 16>
Each channel input signal is directly routed to the correspond-
ing recorder track (shown by the heavy line in the diagram
on the right).
Each input signal is level-adjusted by the [TRIM] control and
converted to digital, then routed to the recorder track, with-
out being tailored by the equalizer, etc. Therefore, you can
record pure input signals which are not affected by mixer
setting for PA.
You can edit and mix down the signals recorded on tracks 1
through 16 after live performance.
TRIM
EQ
Ch Fader
PA N
Assign SW (ST)
EFF SEND
Stereo Fader
Recorder
Internal
Effector
INPUT
STEREO OUT L, R
MON OUT L, R
EFFECT TO STEREO
TRIM
EQ
Ch Fader
PA N
Assign SW (ST)
EFF SEND
Stereo Fader
Recorder
Internal
Effector
INPUT
STEREO OUT L, R
MON OUT L, R
EFFECT TO STEREO
TRIM
EQ
Ch Fader
PA N
Assign SW (ST)
EFF SEND
Stereo Fader
Recorder
Internal
Effector
INPUT
STEREO OUT L, R
MON OUT L, R
EFFECT TO STEREO
<Recording the stereo mix>
Mixed channel input signals are routed to the stereo mix track
through the mixer channel (shown by the heavy line in the
diagram on the right).
Each input signal goes to the mixer channel and is tailored
using the EQ, internal effects, etc., then is routed to the ste-
reo buss where all input signals are mixed, and then routed
to the stereo mix track.
Therefore, the same signal as the [STEREO OUT] and [MON
OUT] signal is recorded to the stereo mix track.
In other words, you can record the same signal as the PA
output signal.
You can play back a stereo mix file recorded to the stereo mix
track using the memory play function.
<Recording to tracks 1 through 16 and stereo mix track simultaneously>
You can record each input signal individually to the corre-
sponding track (shown by the dotted line on the right dia-
gram), while recording the stereo-mixed signal to the stereo
mix track simultaneously.
In other words, you can record the same signal as the PA
output signal, as well as record individual signals indepen-
dently. You can edit and mix down the individual signals
recorded on tracks 1 through 16 after live performance.
* You can play back the project recorded on tracks 1 through
16, while you can play back the stereo mix using the memory
play function.
You can perform live recording while you use the LR16 as a PA mixer on live stage.