Filter
Top Products
75
Model LR16 [Recorder function / File transfer to/from a computer]
<Memo>: To cancel USB connection,
press the [EXIT/NO] key. The display
returns to show the previous screen. You
can exit the MENU mode by pressing the
[EXIT/NO] key repeatedly.
(4) While "?" is flashing on the screen, press
the [ENTER] key.
USB connection is enabled and the display
shows the screen below.
While the screen above is shown, you can
transfer audio data between the LR16 and
the personal computer.
<Memo>: When USB connection is en-
abled, the icon of a removable disk drive
as below is shown on the "My computer"
window (the icon may be different de-
pending on computers).
LR16 (E:)
<Protecting the internal hard disk>
On the USB menu screen, you can also select
"Disk protect" menu item.
This menu item allows you to enable or disable
the protection of the internal hard disk.
By default, it is set to "Off" and you can read
from or write to the internal hard disk by com-
puter operation.
If you want to protect the internal hard disk
from destroying file data on the hard disk by
accidental computer operation, it is recom-
mended to enable the "Disk protect" function.
When the "Disk protect" function is enabled,
you can only read data from the internal hard
disk by computer operation.
To enable the Disk protection function, follow
the procedure below.
In the description below, it is assumed that the
USB menu is shown on the display.
(1) Use the [MENU] dial to highlight
"Disk protect" and press the [ENTER]
key.
The current setting ("Off" by default)
starts flashing.
(2) Use the [MENU] dial to select "On" and
press the [ENTER] key.
The disk protect function is now enabled
and the display returns to the previous
screen. Then enable USB connection.
To disable the disk protect function,
perform the same procedure as above.
<Note>:
It is recommended to enable "Disc
protect" before you enable USB connection.
(3) While "USB to PC" is highlighted, press the
[ENTER] key.
The display now shows the screen below,
in which "?" is flashing.
<Memo>: If you initialize the system memory
via the "Sys default memory" menu item of
the "System" menu, the disk protect func-
tion reverts back to "Off".